Graham Field Assembly, Labtron V223 Mobile Adjustable Aneroid Sphygmomanometer, large washer

Page 3

upper bracket

upper bracket

M6 screw and washer

upper pole

height adjustment knob

lower pole

pole base

base

caster

aneroid sphygmomanometer

lower bracket

M4 screw

basket

spring

large washer

M8 screw and small washer

V223 Mobile Adjustable

Aneroid Sphygmomanometer

ASSEMBLY

Refer to the picture above to assemble the Mobile Height- Adjustable Aneroid Sphygmomanometer.

1.Assemble casters and base.

2.Insert pole base into base.

Labtron V223 Mobile Adjustable Aneroid Sphygmomanometer

3

Image 3

Contents Mobile Height-Adjustable Aneroid Sphygmomanometer Model User Manual Save this manual for future referenceV223-INS-LAB-RevB11 INTENDED USE Tools needed for assembly Phillips screwdriver, 9/16 wrenchCONTENTS SAFETY GUIDELINES - PLEASE READ BEFORE USElower pole pole base base caster ASSEMBLYV223 Mobile Adjustable Aneroid Sphygmomanometer upper bracket M6 screw and washer upper pole height adjustment knob3. Insert lower pole into pole base are written with the highest value first, then the lowest value. Readings of 120/80 are considered to be normal, with high blood pressure being defined as a systolic pressure which is 140mmHg or more at rest and a diastolic pressure which is 90mmHg or more at rest. Only a patient’s physician is qualified to determine whether the readings obtained are normal for that person Diastolic blood pressure reading Allow the pressure to continue dropping at the same deflation rate. Note the reading on the gauge when the last audible thumping, swishing, or blowing sound is heard this is the diastolic blood pressure reading. After a few seconds have passed and no audible thumping, swishing, or blowing sounds are heard, deflate the cuff using the air release valve completely. Remove the cuff and stethoscope from the arm WARRANTY MAINTENANCEGF Health Products, Inc

Related manuals

Manual 8 pages 15.27 Kb