AUTO, HEAT, COOL, DRY
|
|
|
| 1 |
2 |
|
|
| Start the |
|
|
| operation. | |
|
|
|
| |
Select the | HEAT |
| SPEED |
|
desired | AUTO |
| FAN |
|
DRY |
| AIR |
| |
operation. | COOL |
|
|
|
|
| SWING |
| |
|
|
|
| |
| ION |
|
|
|
| MODE | OFF/ON | ion |
|
| QUIET |
|
|
|
| POWERFUL TEMP FAN SPEED |
| ||
|
| AIR SWING |
| 3 |
| TIMER |
|
| |
|
|
|
| |
| ON |
| SET |
|
| 1 | 2 | 3 | Set the |
|
| |||
| OFF |
| CANCEL | temperature. |
|
|
| AC RC | (16°C~30°C) |
|
|
|
| |
| SET CHECK CLOCK | RESET |
| |
INVERTER
■ Operation Details
AUTO - Automatic Operation |
| |
• Unit selects the operation mode |
| |
according to temperature setting, |
| |
outdoor and room temperature. | ENGLISH | |
• The power indicator blinks during | ||
| ||
operation. |
| |
• Operation mode is reselected |
| |
every 30 minutes. |
|
HEAT - Heating Operation
•In heating mode, it takes a while for the unit to warm up. The power indicator blinks during this operation.
COOL - Cooling Operation
•Enjoy cool air at your desired temperature.
DRY - Soft Dry Operation
•Keeps your environment dehumidified by running a very gentle cooling operation.
•During soft dry operation, the indoor fan operates at low fan speed.
■Hint
•A temperature setting 1°C higher in cooling operation or 2°C lower in heating operation than the desired temperature equates to a 10% power saving.
●Supersonic air purifying device (super
●
, 
and 
operations are available in all modes.
●Press 
again to stop the operation.
Troubleshooting
●Mist emerges from indoor unit.
●Heating/Cooling operation does not work.
►Condensation effect due to cooling process.
►Ensure temperature is set correctly.
►Make sure windows and doors are closed.
►Make sure filters are cleaned and replaced.
►Make sure inlet and outlet vents are cleared.
●Water flowing sound during operations.
●The power indicator blinks during the operation and the indoor fan is stopped.
►Cause by refrigerant flow inside the unit.
►The unit is in defrost mode, and the melted frost is drained from the outdoor unit.
5