Razor Powerwing owner manual Attaching the Handlebars, Adjusting the Brake

Page 5

Set-Up and usage

qAttaching the Handlebars

1Remove the plastic protector covering the wedge and loosen the black folding knob and swing to the 6 o’clock position to unfold the handlebar stem.

4Using a 5mm hexagonal key wrench to tighten the stem bolt. The stem bolt is properly tightened when the handle- bars cannot be twisted out of alignment with the front wheel. Make sure the handelbars are in line with the front wheel before tighten stem bolt all the way.

2Insert the handlebar stem into the front fork. You may have to loosen the wedge to allow it to slip into the front fork.

5Bring the handlebar stem back to the upright position.

3Slide the handlebar stem down into the front fork until it fits snuggly into the lock nut on the headset.

6Swing the black folding knob to the 12 o’clock position and tighten by hand until handlebars are secure.

WARNING: Failure to properly tighten the wedge may allow the handlebars to dislodge while riding and may cause you to lose control and fall. When correctly tightened, the handlebars will not rotate out of alignment with the front wheel under normal circumstances.

WARNING: Keep your fingers clear of the pivoting mechanism when folding or unfolding the PowerWing™, and make sure others are standing clear.

Note: The cable and wire assembly from the handlebar must not wrap around the steering tube or handlebar as shown in step 3. Sharp bends or twisting of the brake cable can cause the brake to malfunction.

qAdjusting the Brake

1 To adjust the brake cable

2 Squeeze the hand lever to

3 If the brake is too tight or too

wire, thread the brake lever

test the brake to make sure it

loose, use a 8mm open wrench

adjuster in or out 1/4 to 1/2 turn

is working properly. The front

and a 3mm allen wrench to make

until the desired cable tension is

fender should clamp down and

adjustments as needed.

attained.

rub against the front wheel. If

 

 

brake is not working properly,

 

 

proceed to the next step.

 

Need Help? Visit our web site for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Version10110 Specifications subject to change without noticeBlack Silver DLX Safety Warnings ContentsRequired Tools Estimated Assembly and Set-Up TimeBefore You Begin 4b The platforms should now be snug against the frame Set-Up and usageAttaching the Foot Platforms Attaching the Handlebars Adjusting the BrakeBrake Cable Adjust Screw PowerWing PartsBrake Mounting Coupling Stability Bar Right/Left 15 1 5mm Hexagonal BoltWarranty Safety remindersBrake Safety Gear Loose Parts Frame, Fork and Handlebars

Powerwing specifications

The Razor Powerwing is a unique and innovative three-wheeled scooter designed for those who seek an exhilarating ride while enhancing balance and coordination. Combining a sleek design with impressive features, the Powerwing appeals to kids and adults who enjoy outdoor adventure.

One of the standout features of the Razor Powerwing is its distinctive three-wheel design, which provides enhanced stability compared to traditional scooters. Unlike two-wheeled scooters, the Powerwing allows riders to shift their weight from side to side to propel themselves forward, creating a fun and dynamic riding experience. This design not only makes it easier to ride but also helps improve core strength and balance as users learn to navigate their environment.

Equipped with a powerful electric motor, the Razor Powerwing offers speeds up to 10 miles per hour, making it an exciting choice for adventurous riders. The rechargeable battery provides ample power, allowing for extended rides before needing a recharge. The motor's responsiveness and the scooter's lightweight frame mean that riders can easily accelerate and decelerate, adapting to their surroundings seamlessly.

The Powerwing is constructed with durability in mind. Its sturdy steel frame can withstand the rigors of outdoor play, ensuring that it remains a reliable companion for years to come. The scooter features a wide deck that accommodates riders of various sizes, offering comfort as they cruise around the neighborhood or the park.

Safety is also a key focus in the design of the Razor Powerwing. It comes equipped with a rear foot brake, allowing riders to stop quickly and safely when needed. The large, stable wheels help maintain traction, while the overall design allows riders to feel secure as they perform tricks or navigate turns.

For those looking to customize their ride, the Razor Powerwing also provides opportunities for personalization. With various colors and designs available, riders can express their individuality while enjoying the thrill of their three-wheeled scooter.

In summary, the Razor Powerwing is a standout choice for riders seeking an exciting and versatile mode of transportation. With its unique design, powerful motor, and focus on safety and durability, it captures the essence of fun and freedom, making it a must-have for adventure enthusiasts. Whether riding for leisure or pushing the limits with tricks, the Razor Powerwing delivers an exceptional experience that keeps riders coming back for more.
Top Page Image Contents