IV. ASSEMBLY/DISASSEMBLY
SL6 LIFT CHAIR
Your lift chair may require some assembly before initial use. It may also require disassembly to make servicing the chair more convenient. If your lift chair is a
LIFT CHAIR SET-UP
KD models will arrive in the
Figure 4.1 Knock-Down (KD) Position
Follow these steps to assemble the lift chair:
LOCKING CLIP
KD SLEEVE
KD CONNECTION
4.1.1.Remove the packaging from the back portion of the chair and check that the locking clip is in the vertical position. Reposition if necessary.
4.1.2.Slide the left and right KD sleeves of the chair- back onto the KD connections on the arms and seat of the chair.
SL6 Lift Chair | www.pridemobility.com | 11 |