Pride Mobility J6 2SP manual Daily Use, Infrequent Use, What type of batteries should I use?

Page 31

V I . B A T T E R I E S A N D C H A R G I N G

Daily Use

If you use your power chair on a daily basis, charge the batteries as soon as you are finished using your power chair. Your power chair will be ready each morning to give you a full day’s service. It is recommended that you charge the batteries 8 to 14 hours after daily use.

Infrequent Use

If you use your power chair infrequently (once a week or less), you should charge the batteries at least once per week for 12 to 14 hours.

NOTE: Keep your batteries fully charged and avoid deeply discharging your batteries. Refer to the manual supplied with the battery charger for charging instructions.

How can I get maximum range or distance per charge?

Rarely do you have an ideal driving situation such as smooth, flat, hard terrain with no wind, hills, or curves. More often you are presented with hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of these factors will affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maximum range per charge:

Always charge the batteries fully prior to your trip. Plan your trip in advance to avoid inclines if possible. Limit baggage weight to essential items.

Try to maintain an even speed and avoid stop-and-go driving.

What type of batteries should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep-cycle batteries that are similar in performance. Refer to “Appendix I - Specifications” for more information regarding the batteries used with your power chair.

WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

Why do my new batteries seem weak?

Deep-cycle batteries employ a much different chemical technology than that used in car batteries, nickel-cad- mium (nicads), or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down their charge, and then accept a relatively quick recharge. AGM and Gel-Cell batteries should be charged as often as possible. They do not have a “memory” like nickel-cadmium batteries.

We work closely with our battery manufacturer to provide a battery that best suits your power chair’s specific demands. Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During shipping, the batteries encounter temperature extremes that may influence initial performance. Heat robs the charge from the battery, and cold slows the power available and extends the time needed to recharge the battery (just as with a car battery).

It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient temperature. More importantly, it will take a few “charging cycles” (a partial drain— then a full recharge) to establish the critical chemical balance that is essential to the battery’s peak performance and long life. It will be well worth it to take the time to break in your battery properly.

J6 Series

www.pridemobility.com

31

Image 31
Contents Including Models J6 2S and J6 2SP Quick Reference Information F E T Y G U I D E L I N E SIII N T E N T SShipping and Delivery SafetyN T R O D U C T I O N PURCHASER’S AgreementS a F E T Y Product Safety SymbolsS a F E T Y S a F E T Y Shroud General Guidelines Pre-Ride Safety CheckModifications Tire Inflation Weight LimitationsIncline Information Braking Information Freewheel ModeCornering Information To navigate up over a curb or stationary obstacle Inclement Weather PrecautionsPublic Streets and Roadways Outdoor Driving Surfaces Stationary Obstacles Steps, Curbs, etcLift Systems/Elevation Products Stairs and EscalatorsDoors ElevatorsBatteries Positioning BeltsPrescription Drugs/Physical Limitations TransfersElectromagnetic and Radio Frequency Interference EMI/RFI Alcohol/SmokingI . Y O U R P O W E R C H a I R J6 Power ChairElectrical Components J6 Power BaseJ6 Electrical Components To engage or disengage the drive motors Manual Freewheel LeversA S S E M B L Y Initial AssemblyTo install the seat Seat InstallationTo install the power seat Power Seat Option InstallationO M F O R T a D J U S T M E N T S Comfort AdjustmentsYou may need the following to make comfort adjust- ments Seat Height and Seat Angle AdjustmentSeatback Angle Adjustment Manual Recline Seatback AdjustmentSeat Position Armrest Angle Adjustment Armrest Width AdjustmentController Position To raise or lower the foot platform Foot Platform Height AdjustmentFoot Platform Depth Adjustment To adjust the foot platform depthTo change the seat height through toggle switch Foot Platform Angle AdjustmentTo adjust the foot platform angle Power Elevating Seat OptionalBatteries and Charging B a T T E R I E S a N D C H a R G I N GCharging the Batteries Frequently Asked Questions FAQs Battery Break-inHow can I get maximum range or distance per charge? Why do my new batteries seem weak?Daily Use Infrequent UseWhat about shipping? How can I ensure maximum battery life?How should I store my power chair and its batteries? What about public transportation?I . C a R E a N D M a I N T E N a N C E Care and MaintenanceShould your power chair come in contact with water TemperatureMonthly Checks Daily ChecksWeekly Checks To check the brakesStorage Disposal of Your Power ChairCleaning and Disinfection Wheel ReplacementSolid Drive Wheel Removal Battery Installation To replace the batteries Battery ReplacementCorrective Maintenance When to See Your authorized Pride Provider for ServiceJ6 Specifications P E N D I X I Specification SJ6 Dimensions and Ground Clearance T E S Page Product Serial # Quality Control J6