Pride Mobility 1143 manual Foot Platform Height Adjustment, To raise or lower the foot platform

V . C O M F O R T A D J U S T M E N T S
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 0.5-in. (1.27 cm) increments.	FOOT PLATFORM BRACKET
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot plat-	QUICK RELEASE
form bracket. See figure 18.	FASTENERS
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot plat-
form bracket. See figure 18.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
Quick Release Fasteners: The foot platform is attached	FOOT
to the power base with two quick release fasteners. See
	PLATFORM
figure 18. Each quick release fastener consists of a bolt, a	RETAINING
lever, and a nut. See figure 19. The lever has a cam on the	PIN
end that allows it to clamp into place. The quick release
fastener has two states: clamped and unclamped. When the
lever is open, the quick release fastener is unclamped. When
the lever is closed, the quick release fastener is clamped.	Figure 18. Foot Platform Adjustment

To clamp the quick release fastener:

1.Make sure the lever is in the open position.

2.Turn the nut clockwise until it is snug.

3.Rotate the lever until it is in the fully closed position.

NOTE: If the lever will not rotate to the fully closed position, then turn the nut counterclockwise one-quar- ter or one-half turn.

NUT

BOLT

LEVER (FULLY CLOSED)

CAM

UNCLAMPED

CLAMPED

LEVER (OPEN)

Figure 19. Quick Release Fastener Operation

Jazzy 1143 Ultra www.pridemobility.com 29