Pride Mobility 1103 manual Battery Break-in, Frequently Asked Questions FAQs

Page 32

 

V I . B A T T E R I E S A N D C H A R G I N G

To charge the batteries using the off-board charger:

1.

Position the front of your power chair next to a stan-

 

dard electrical outlet.

2.

Be certain the controller power is turned off and the

 

freewheel levers are in the engaged position. See

 

III. “Your Power Chair.”

3.

Plug the off-board charger into the off-board charger/

 

programming socket on the controller.

4.

Plug the off-board charger into the electrical outlet.

NOTE: If it is a Pride off-board charger, then there

are two lights in it. The red light indicates that

power to the off-board charger is on. The green light

indicates that the batteries are fully charged. If it is

not a Pride off-board charger, then follow the in-

structions supplied by the manufacturer.

5.

When the batteries are fully charged, unplug the off-

 

board charger from the electrical outlet and then from

the controller.

Figure 24. Battery Charging

Battery Break-in

To break in new batteries for maximum efficiency:

1.Fully recharge any new battery prior to its initial use. This brings the battery up to about 90% of its peak performance level.

2.Operate your power chair throughout the house and grounds. Move slowly at first, and do not travel too far until you become accustomed to the controls and break in the batteries.

3.Give the batteries another full charge of 8 to 14 hours and operate your power chair again. The batteries will now perform at over 90% of their potential.

4.After four or five charging cycles, the batteries will top off at 100% charge and last for an extended period.

Frequently Asked Questions (FAQs)

How does the charger work?

The battery charger takes the standard electrical outlet voltage of 120 VAC (alternating current) and converts it to 24 VDC (direct current). The power chair batteries use direct current to run your power chair. When the battery voltage is low, the charger works harder to charge the battery. As the battery voltage approaches full charge, the charger does not work as hard to complete the charging cycle. When the battery is fully charged, the amperage from the charger is nearly at zero. This is how the charger maintains a charge but does not overcharge the battery.

Can I use a different battery charger?

You should use the charger supplied with the power chair. It is the safest, most efficient tool to charge the batteries. We do not recommend using other types of chargers (e.g., an automotive battery charger).

NOTE: Your power chair’s charger will not operate after the batteries have been discharged to nearly zero voltage. If this happens, call your authorised Pride Dealer for assistance.

32

www.pridemobility.com

Jazzy 1103 Ultra

Image 32
Contents Jazzy Ultra F E T Y G U I D E L I N E S Quick Reference InformationN T E N T S IIISafety N T R O D U C T I O NPURCHASER’S Agreement Shipping and DeliveryProduct Safety Symbols S a F E T YS a F E T Y S a F E T Y S a F E T Y Modifications Pre-Ride Safety CheckGeneral Guidelines Incline Information Weight LimitationsTyre Inflation Freewheel Mode Braking InformationCornering Information Public Streets and RoadwaysStationary Obstacles Steps, Kerbs, etc Inclement Weather PrecautionsOutdoor Driving Surfaces Stairs and Escalators DoorsLifts Lift/Elevation ProductsBatteries Prescription Drugs/Physical Limitations TransfersUser Positioning Alcohol/Smoking Electromagnetic and Radio Frequency Interference EMI/RFII . Y O U R P O W E R C H a I R Jazzy 1103 UltraJazzy 1103 Ultra Power Base Electrical ComponentsJazzy 1103 Ultra Electrical Components Manual Freewheel Levers To engage or disengage the drive motorsInitial Assembly A S S E M B L YSeat Installation To install the seatComfort Adjustments You may need the following to make comfort adjust- mentsSeat Height and Seat Angle Adjustment O M F O R T a D J U S T M E N T SSeat Position Adjustment Manual Recline Seatback AdjustmentTo adjust the recline angle To change the positionSeatback Angle Adjustment Armrest Width AdjustmentArmrest Angle Adjustment Armrest Height AdjustmentTo change the controller position Controller PositionTo extend the controller Foot Platform Angle Adjustment Foot Platform Height AdjustmentFoot Platform Depth Adjustment Anti-Tip Wheels To adjust the anti-tip wheelsPower Elevating Seat System Standard To use the swivel feature Power Elevating Seat OperationTo operate the power elevating seat To install the positioning belt To adjust the positioning belt for operator comfortPositioning Belt To release the positioning beltCharging the Batteries B a T T E R I E S a N D C H a R G I N GBatteries and Charging Battery Break-in Frequently Asked Questions FAQsWhy do my new batteries seem weak? How often must I charge the batteries?Daily Use Infrequent UseHow can I ensure maximum battery life? How should I store my power chair and its batteries?What about public transportation? What about shipping?Care and Maintenance Should your power chair come in contact with waterTemperature I . C a R E a N D M a I N T E N a N C EDaily Checks Weekly ChecksTo check the brakes Monthly ChecksDisposal of Your Power Chair Cleaning and DisinfectionWheel Replacement Yearly ChecksBattery Replacement Jazzy 1103 Ultra Drive WheelTo replace the batteries When to See Your Authorised Pride Dealer for Service Corrective MaintenanceI I . W a R R a N T Y P E N D I X I Specification S Jazzy 1103 Ultra SpecificationsJazzy 1103 Ultra Dimensions and Ground Clearance T E S T E S T E S Quality Control Jazzy 1103 Ultra
Related manuals
Manual 33 pages 32.86 Kb

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.