Sunrise Medical LXI instruction manual FLIP-BACK Armrests

I X . S E T U P & A D J U S T M E N T

I X . S E T U P & A D J U S T M E N T

G. FLIP-BACK ARMRESTS

Flip-back armrests are shipped standard on Quickie LXI wheelchairs. They are installed at Quickie.

1.Flipping Armrests Back

a. To flip armrests back, depress the release latch and pull arm toward back of wheelchair.

H. FLIP-BACK HEIGHT ADJUSTABLE ARMRESTS (Optional)

Flip-back height-adjustable armrests are installed at Quickie.

1.Height-Adjustment

a.Release the upper securing lever.

b.Slide armpad up or down to desired height.

c.Return lever to locked position.

2.Flipping Armrest Back and Removing Armrest

a.Depress the release latch and pull arm toward back of wheelchair.

b.To remove, pull up on armrest. Pin securing armrest will automatically release.

c.To return armrest to operating posi- tion, push armpad down until it locks firmly into place.

Flip-Back Height Adjustable Armrests (Optional)

1.Armrest pad

2.Upper securing lever

3.Release latch

4.Armrest panel

5.Rear receiver

6.Armrest release pin

I.HEIGHT-ADJUSTABLE ARMRESTS (Optional)

1.Installation

a.Slide the outer armpost into the receiv- er mounted to the wheelchair frame.

b.The armrest will automatically lock into place.

2.Height Adjustment

a.Rotate release lever to second stop.

b.Slide armrest pad up or down to desired height.

c.Return lever to locked position against armpost.

d.Push arm pad until upper armpost locks firmly into place.

3.Removing Armrest

a.Rotate release lever to first stop and remove the armrest.

4.Replacing Armrest

a.Slide armrest back into receiver.

b.Return release lever to locked position against armpost.

5.Adjusting Armrest Receive Fit

To tighten or loosen the fit of the outer armpost in the receiver:

a.Loosen the four bolts on the sides of the receiver.

b.With the armrest in the receiver, squeeze the receiver to achieve the desired fit.

c.Tighten the four bolts.

6.Adjusting Inner Armpost Fit

a.Two set screws are installed in the outer armpost.

b.Turn the set screws in or out until

the desired fit is achieved.

		4
5		8
		7
	2
	9	6
	1

Height Adjustable Armrest Key

1.Outer Armpost

2.Standard receiver

3.Release lever

4.Armrest pad

5.Transfer bar

6.Side panel

7.Outer armpost tension adjust- ment set screws

8.Inner armpost

9.Receiver adjustment bolts

26 27