Kettler 08451-799 manual Kettler limited warranty

Page 4

Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this scooter.

Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!

Bolt all the parts together loosely at first, and check that they have been assembled cor- rectly. Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been un- screwed they no longer function correctly (the locking device is destroyed), and must be replaced.

The grips can be pushed onto the handlebars more easily if they are first soaked in warm water.

Please keep original packaging of this article, so that it may be used for transport at a lat- er date, if necessary. Goods may only be returned after prior arrangement and in (inter- nal) packaging, which is safe for transportation, in the original box if possible. It is im- portant to provide a detailed defect description / damage report!

For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).

When ordering spare parts, always state the full item number, spare-part number, the quantity required and the serial number of the product.

Example order: item # 08451-799 / spare part no. 12802003 / 1 piece/ S/N ...

Important: spare part prices do not include fastening material; if fastening material (bolts,

nuts, washers etc.)is required, this should be clearly stated on the order by adding the words „with fastening material“.

KETTLER® limited warranty

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR THE MANUFACTURER ON KETTLER PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRANTY AGAINST DEFECTS IN MATERIAL SET OUT BELOW:

This KETTLER® Limited Warranty applies to products sold through the KETTLER® Authorized De- aler Network to the original retail purchaser and authenticated by proof of purchase from a re- tailer located in the United States. Any shipments made under this warranty will be shipped to the United States only. Any shipment outside of the United States will be at the sole cost of the customer. This KETTLER® Limited Warranty is a manufacturer’s warranty and is not changed or modified by additional warranties extended by individual retailers at the point of sale. Manu- facturer warrants this product to be free from defects in material at the time of the product’s ten- der of delivery for a period of 3 years for residential use. This Limited Warranty is not transfe- rable and does not cover normal wear and tear (including, but not limited to, damage and wear

4

Image 4
Contents „SCOOTER Princess Assembly Instructions USAUse of the Toy Kettler limited warranty Parts@kettlerusa.com Checklist Page M12 Handling USASpare parts drawing Spare parts list Docu 2392/12.08