SET-UP and USAGE
qAssembling the Front Fork
Tools Needed: 13 mm wrench
B
A
1Remove the black protective cover from the top of the fork. Using a 13 mm wrench, loosen collar clamp bolt and slide collar clamp (B) up the fork and remove. Remove washer (A) from fork. Insert the front fork into the steering tube. Slide washer (A) back onto the front fork. Slide collar clamp (B) back down onto the fork until it is sitting directly on top of washer (A).
qAttaching the T-bar
Tools Needed: 13 mm wrench
C
1 Slide collar clamp cover (C) up | 2 Align the handlebars with the |
to the middle of the | front wheel and using a 13 mm |
the | wrench, tighten the collar clamp |
front fork. | bolt until the handlebars are |
| locked securely into place. Slide |
| the collar clamp cover down over |
| the collar clamp. |
A
B
C
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free
4