TROUBLESHOOTING GUIDE
Problem | Possible Cause |
Sometimes the vehicle | Loose wires or connectors |
doesn’t run, but other times |
|
it does |
|
| Motor or electrical switch damage |
Charger gets warm during Normal response to charger use | |
use |
|
Vehicle does not stop when | Brakes are not adjusted properly |
applying the brake |
|
Vehicle makes loud noises | Chain adjustment is too tight or too |
or grinding sounds | loose |
| Chain is too dry |
Solution
Check all wires around the motors and all connectors to make sure they are tight.
Contact your local Razor authorized service center for diagnosis and repair.
No action required. This is normal for some chargers and is no cause for concern. If your charger does not get warm during use, it does not mean that it is not working properly.
Refer to adjusting the brakes instructions on page 4.
Refer to instructions on page 5 of this manual to properly adjust chain and sprocket.
Apply a lubricant such as 3 in 1 TM or
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call
8