Installation Procedures

WINDOW REQUIREMENTS

CHASSIS INSTALLATION INTO THE CABINET

•Hot sun rays hitting the outside surface of the cabinet will create considerable heat load. If the outside of the cabinet is exposed to direct sunlight, consider building an awning to shade the cabinet while providing ample area for the heated air to be exhausted from the condenser

(both sides) and the top.

This unit is designed for installation in standard double hung windows.

15-15/16” (min)

22	to 42- /8”
	1

1Slide the chassis into the cabinet.

2Reinstall the cabinet screws.

Secure the cabinet to chassis by using screws (from rear cabinet).

NOTE

The unit may also be installed “through the wall”. You should, however, observe standard carpentry practices and frame the opening without violating local ordinances.

1 Remove the rear cabinet screws and save for later use.

2 Slide the chassis out from the cabinet.

HOW TO ASSEMBLE THE EXPANDABLE PANELS

Wireless

INSTALLATION OF THE FRONT GRILLE

Depending upon the location of the AC outlet, route the AC cord to either the left or right side while installing the front

Top angle

Top sealing

ribbon (To be attached to the top angle)

Type B screws

Expandable panel

Side sealing ribbon (To be attached to

the expandable panel)

grille.

Wireless

This figure shows the AC cord routed to the left side.

NOTE

This procedure applies to left and right Type C screws of assembling expandable panel.

•Attach the top angle to the cabinet using screw type B (3 pcs).

•Insert expandable panels to cabinet sides as shown.

•Secure the first fold of expansion panel to cabinet using screw type C (3 each).

CABINET INSTALLATION

1	Place the front grille on the
	cabinet first.
2	Secure the front grille to the
	main chassis using screw	Wireless
	provided.

1Cut the “Sealing Ribbon” to the proper length, and attach it along the bottom edge of the bottom window sash.

2To prevent condensation water from dripping inside, the cabinet should be installed level or very slightly tilted to the outside.

3Secure the cabinet using screws.

Window sash sealing ribbon

INSERT THE AIR FILTER

Attach the air filter to the intake grille

Wireless

Type A screw

Type B screws

Window sill Type A screws

Inside of	Outside of sash
sash	Window sash
	Window sash
Top angle	Sealing ribbon
	Sealing ribbon
Expandable panel
Window sash
foam seal

PLACE FRONT INTAKE GRILLE OVER THE FRONT GRILLE

Slide the front intake grille slightly to the right to reattach the tabs and then push it down to close tight.

•Expand the expandable panel fully into the grooves of the window frame, secure the expandable panel, left, right and top mounting frames to the bottom of the window sash using 4 screws type A and 2 screws type B.

•Secure the cabinet using wood screws type A.

•Cut the window sash foam seal to the proper size and seal the opening between the top of the inside window

sash and the outside window sash.

Note :If a gap exists between the unit and window sash, you may use “Sealer” supplied with the installation kit for a better seal.

Wireless

Lift up about 90°.

CW-XC122VU specifications

The Panasonic CW-XC122VU is a state-of-the-art portable air conditioner designed to provide optimal cooling solutions for homes and small spaces. With its modern design and innovative features, this unit stands out in the competitive HVAC market.

One of the notable features of the CW-XC122VU is its powerful cooling capacity. It is equipped with a cooling output of 12,000 BTU, making it suitable for rooms up to 550 square feet. This capacity ensures that the air conditioner can effectively cool the space quickly and maintain a comfortable temperature even during the hottest summer days.

The CW-XC122VU utilizes advanced inverter technology that not only enhances cooling performance but also improves energy efficiency. By adjusting the compressor speed to maintain the desired temperature, the unit reduces energy consumption, leading to lower utility bills. This eco-friendly feature aligns with Panasonic’s commitment to sustainability and environmental responsibility.

Another significant characteristic of the CW-XC122VU is its user-friendly interface. The air conditioner comes with a remote control that allows users to adjust settings from a distance, including temperature, fan speed, and operating modes. Additionally, the unit features an easy-to-read LED display, making it simple to monitor and adjust configurations.

The CW-XC122VU is also designed with enhanced filtration technology, which helps improve indoor air quality by capturing dust, allergens, and other particles. The washable filters are easy to maintain, ensuring that the unit operates efficiently and effectively over time.

For added convenience, this portable air conditioner includes a dehumidifying function, which can remove excess moisture from the air. This feature is especially beneficial in humid climates, as it helps create a more comfortable living environment.

Furthermore, the Panasonic CW-XC122VU is designed for portability, featuring built-in caster wheels that make it easy to move from room to room. Its compact design allows for flexible placement without taking up too much space, making it an ideal choice for renters and homeowners alike.

In summary, the Panasonic CW-XC122VU is an innovative and efficient portable air conditioner that combines powerful cooling capabilities with advanced technology and user-friendly features. Whether for a bedroom, living room, or office, this unit delivers comfort and convenience, making it an excellent addition to any space.