Quantum Quantum Rival 3SP Seat Position, To change the position, To adjust the recline angle

Page 23

		I V . C O M F O R T A D J U S T M E N T S
	7.	Remove the hardware that attaches the trapeze bars
		to the seat interface weldments. See figure 11.
	8.	Move the trapeze bars up or down to the desired
		height.
	NOTE: Change the seat dump by raising or lowering
	only one trapeze bar (front or rear).
	9.	Reinstall the hardware.
	10.	Reinstall the seat.
	11.	Reconnect the controller to the power base.
	Seat Position
	You can move the seat forward or rearward by chang-
	ing the extrusion mounting position.
	To change the position:
	1.	Turn off the power to the controller.
	2.	Make sure the power chair is in drive mode.	SEAT MOUNTING HOLES
	3.	Unplug the controller connector(s) from the power	SEAT MOUNTING HOLES
	3.	Unplug the controller connector(s) from the power
		base.

4. Remove the seat from the power base.

Figure 12. Seat Position Adjustment

5.Remove both extrusions from the bottom of the seat.

6.Reposition the extrusions on a different set of mounting holes. You must move both extrusions the same number of holes either forward or back- wards. See figure 12.

7.Fasten the extrusions back onto the bottom of the seat.

8.Reinstall the seat.

9.Reconnect the controller to the power base.

Manual Recline Seatback Adjustment

If your power chair is equipped with a reclining seat, you can adjust the seatback angle with the seatback release lever. The lever is located on the right side of the seat base.

To adjust the recline angle:

1.Pull up on the seatback release lever.

2.Lean forward or backwards to the desired position.

3.Release the lever.

Rival

www.pridemobility.com

23

Image 23

Contents Quantum Quick Reference Information Intended UseIII N T E N T SShipping and Delivery SafetyN T R O D U C T I O N PURCHASER’S AgreementS a F E T Y Product Safety SymbolsS a F E T Y S a F E T Y S a F E T Y S a F E T Y Modifications Pre-Ride Safety CheckGeneral Guidelines Incline Information Weight LimitationsTire Inflation Cornering Information Freewheel ModeBraking Information Stationary Obstacles Steps, Curbs, etc Inclement Weather PrecautionsPublic Streets and Roadways Outdoor Driving Surfaces Elevators/Elevation Products Stairs and EscalatorsDoors ElevatorsRemovable Parts Preventing Unintended Movement Positioning BeltsBatteries Prescription Drugs/Physical Limitations Reaching and BendingTransfers Alcohol/Smoking Rival I . Y O U R P O W E R C H a I RElectrical Components Rival Power BaseSport-Trac Suspension Power Chair Securement PointsTo engage or disengage the drive motors Manual Freewheel LeversC O M F O R T a D J U S T M E N T S Comfort AdjustmentsYou may need the following to make comfort adjustments Seat Height and Seat Angle AdjustmentSeat Position Remove the seat from the power baseManual Recline Seatback Adjustment To adjust the recline angleArmrest Height Adjustment Seatback Angle AdjustmentArmrest Width Adjustment Armrest Angle AdjustmentTo change the controller position Controller PositionTo extend the controller Anti-Tip Wheels To adjust the anti-tip wheelsTo release the positioning belt To adjust the positioning beltPositioning Belt Charging the Batteries A T T E R I E S a N D C H a R G I N GBatteries and Charging Frequently Asked Questions FAQs Battery Break-inHow can I get maximum range or distance per charge? Why do my new batteries seem weak?Daily Use Infrequent UseWhat about shipping? How can I ensure maximum battery life?How should I store my power chair and its batteries? What about public transportation?C a R E a N D M a I N T E N a N C E Care and MaintenanceShould your power chair come in contact with water TemperatureMonthly Checks Daily ChecksWeekly Checks To check the brakesStorage Disposal of Your Power ChairCleaning and Disinfection Wheel ReplacementRival Drive Wheel Battery ReplacementTo replace the batteries Battery ReplacementCorrective Maintenance When to See Your Quantum Rehab Provider for ServiceT E S Page Product Serial # Quality Control Rival