I V . A S S E M B L Y
Power Elevating Seat Option
Your power chair may be equipped with a power ele- vating seat option. While the seat itself may be any one of the styles offered for this model, the way the seat base attaches to the power base is different.
To install the power elevating seat:
l.Place the seat plate interface bracket onto the actu- ator. See figure 11.
2.Insert the supplied hardware into the actuator and tighten the hardware.
3.Place the seating system onto the seat plate and secure.
4.Plug in the power seat toggle switch harness, if equipped.
Transit Securement System (Optional)
If your power chair is equipped with a transit securement system, it is equipped with manufacturer- installed front and rear securement brackets and positioning belt anchoring brackets. See figure 12. Refer to the supplement provided with your power chair for information on how to use the transit securement system.
SEAT PLATE INTERFACE |
BRACKET |
ACTUATOR |
Figure 11. Power Elevating Seat Actuator
POSITIONING BELT |
ANCHORING BRACKET LOCATIONS |
(1 OF 2 SHOWN) |
SECUREMENT |
BRACKETS |
(3 OF 4 SHOWN) |
Figure 12. Transit System Securement Brackets (Synergy Seat Shown)
Q6 Edge VA | www.pridemobility.com | 15 |