Shoprider UL7WR/ULWR11 Getting to Know Your Shoprider Jiffy Powerchair, Joystick Controller VSI

Figure 2

Getting to Know Your Shoprider Jiffy Powerchair

The Joystick Controller (VSI 50)

1. On-Off Button: This button turns the joystick					8
				1		2
controller (hereinafter referred to as VSI) on
and off. Do not use this button to stop the
			4				3
folding power chair, except in an emergency.
2. Battery Gauge:		This is a 10-segment
display, which indicates if the VSI is switched			5				6
on and gives the state of charge of the
battery.	Additionally, any faults in the
Powerchair	electrical system are also
							7
indicated by this display. Refer to Table 1 for
more details.

3.Maximum Speed Indicator: This is a 5- segment display, which indicates the maximum speed setting selected.

4. Horn Button: This button operates the Powerchair’s horn.

5.Speed Decrease Button: This button decreases the maximum speed.

6.Speed Increase Button: This Button Increases the maximum speed.

7.Joystick: This controls the speed and direction of the Powerchair. Push the joystick in the direction you want to go. The further you push it, the faster the speed will be. Releasing the joystick will automatically engage the brakes and stop the Powerchair.

8.Charging Port for Off-Board Charger: This is a secondary charging port, in addition to the charging port located on the battery pack. Only plug into this port with the qualified charger certified by the original manufacturer of the Powerchair. This port should not be

used as a power supply for any other electrical devices. The behavior against the two states as above will void the warranty of the Powerchair.

Note: The controller can be fitted to suit either right or left-handed users.

8/16/2005 9