Pride Mobility Victory 9 PS, Victory 10 Wheel Replacement, ABS Plastic Shrouds, Motor Brushes

Page 40

I X . C A R E A N D M A I N T E N A N C E

WHEEL REPLACEMENT

If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If your scooter is equipped with a solid tire insert, either the solid insert or the entire wheel must be replaced depending on the model. Contact your authorized Pride Provider for information regarding replacement wheels for your scooter.

	WARNING! Wheels on your scooter
	should only be serviced/replaced by
	an authorized Pride Provider or
	qualified technician.
Follow these easy steps for a quick and safe repair
for solid tires:
1.	Remove the key from the key switch.	Figure 23. Solid Tire Wheel Removal
2.	Elevate the side of the scooter of which you are
	removing the tire. Place wooden blocks under the
	frame to elevate the scooter.
3.	Remove the drive wheel nut and washer from the
	axle. See figure 23.
4.	Pull the wheel off the axle.
5.	Slide the new wheel back onto the axle.
6.	Reinstall the drive wheel nut and washer onto the
	axle and tighten.
7.	Remove the block from beneath the scooter.

ABS PLASTIC SHROUDS

The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are coated with an advanced formula urethane paint.

A light application of car wax will help the shrouds retain their high gloss.

AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY

These items are all prelubricated, sealed, and require no subsequent lubrication.

MOTOR BRUSHES

The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi- cally for wear by your authorized Pride Provider.

CONSOLE, CHARGER, AND REAR ELECTRONICS

Keep these areas free of moisture.

Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter again.

40

www.pridemobility.com

Victory Series

Image 40

Contents Victory F E T Y G U I D E L I N E S N T E N T S Safety N T R O D U C T I O NPURCHASER’S Agreement Shipping and DeliveryProduct Safety Symbols S a F E T YS a F E T Y S a F E T Y S a F E T Y General Removable Parts PRE-RIDE Safety CheckModifications Tire Inflation Weight LimitationsIncline Information S a F E T Y Your scooter is equipped with these powerful brake systems Cornering InformationBraking Information Outdoor Driving SurfacesInclement Weather Precautions Correct Curb ApproachFreewheel Mode Stairs and EscalatorsDoors ElevatorsBattery Disposal and Recycling LIFT/ELEVATION ProductsBatteries Preventing Unintended MovementGetting Onto and OFF of Your Scooter Motor Vehicle TransportReaching and Bending Positioning Belts Prescription DRUGS/PHYSICAL LimitationsALCOHOL/SMOKING Electromagnetic and Radio Frequency Interference EMI/RFIS a F E T Y I . Y O U R S C O O T E R Tiller ConsoleStatus LED Throttle Control Lever Rear Section BatteriesMain Circuit Breaker Reset Button Reading Your Battery Voltage B a T T E R I E S a N D C H a R G I N GBatteries and Charging Charging Your BatteriesFrequently Asked Questions Follow these easy steps to change your batteries safelyHow does the charger work? Can I use a different charger?How can I ensure maximum battery life? What type and size of battery should I use?How often must I charge the batteries? How can I get maximum range or distance per charge?How do I change a battery in my scooter? To change the batteries in your scooterWhy do my new batteries seem weak? Battery Removal/InstallationFollow these steps to properly break in your scooter’s new Batteries for maximum efficiency and service lifeWhat about public transportation? PRE-RIDE Adjustments and Checks P E R a T I O NBefore Getting Onto Your Scooter Getting Onto Your ScooterPower Down Timer Feature Getting OFF of Your ScooterTiller Angle Adjustment Armrest Width AdjustmentC O M F O R T a D J U S T M E N T S Mirror PositionFRONT-TO-BACK Seat Adjustment Seat Rotation AdjustmentSeat Height Adjustment Power Seat Adjustment To operate the power seatDisassembly I . D I S a S S E M B L Y a N D a S S E M B L YAssembly Frame Separation I I . B a S I C Troubleshooting Diagnostic Fault CodesWhat if the main circuit breaker repeatedly trips? C a R E a N D M a I N T E N a N C E Wheel Replacement Axle Bearings and the MOTOR/TRANSAXLE AssemblyABS Plastic Shrouds Motor BrushesFuse Replacement Nylon Lock NUT ReplacementEvent a fuse should cease to work Storing Your ScooterP E N D I X I Specification S Victory 10 SpecificationsVictory 10 Dimensions Victory 9 Specifications Victory 9 Dimensions Victory 9 PS Specifications SC609PSP E N D I X I Specification S T E S T E S T E S Page INFMANU3629