I I I . I N S T A L L A T I O N
CADDY WHEELCHAIR CARRIER INSTALLATION
The Caddy Wheelchair Carrier is designed to be easily installed into any vehicle equipped with a Class 1, Class 2, or Class 3 hitch receiver. The hitch receiver should be installed no more than 20 in. (50.8 cm) from the bottom of the hitch tube to the ground. If your vehicle is equipped with a Class 2 or Class 3 hitch tube receiver, a Class 1 hitch adapter will need to be installed. Contact your authorized Pride Provider for more information.
NOTE: Once installed, the wheelchair carrier may obstruct the view of the vehicle license plate. Research the local laws for license plate obstruction in your area before installing the wheelchair car- rier.
HITCH TUBE RECEIVER |
HITCH TUBE ADAPTER |
1.Install the hitch tube to the vehicle hitch tube receiver. Insert the hitch bolt from the passen- ger’s side through to the driver’s side of the hitch.
HITCH BAR ASSEMBLY |
2. Attach the hitch bar assembly to the hitch tube.
WARNING! Threading the hitch bolt from the wrong side or allowing the bolt to turn while tightening the nut will dislodge the threaded insert in the hitch tube.
Caddy Wheelchair Carrier | www.pridemobility.com | 7 |