I . C a R E a N D M a I N T E N a N C E

V I I . C A R E A N D M A I N T E N A N C E

CARE AND MAINTENANCE

Your Quantum 6000Z Series is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance checks. You can perform some of these checks, but others require assistance from your Quantum Rehab Specialist. Preventive maintenance is very important. If you follow the maintenance checks in this section as scheduled, you can help ensure that your power chair gives you years of trouble-free operation. If you have any doubt as to your power chair’s care or operation, contact your Quantum Rehab Specialist.

WARNING! Do not service the power chair when the seat is occupied.

Your power chair, like most electrical equipment, is susceptible to damage from the elements. Avoid damp areas of any kind.

WARNING! Direct or prolonged exposure to water or dampness could cause the power chair to malfunction electronically and mechanically. Water can cause electrical components to corrode and the chair’s frame to rust. Power chairs should be examined periodically for signs of corrosion cause by water exposure, bodily fluids exposure, or incontinence. Damaged components should be replaced or treated immediately.

Should your power chair come in contact with water:

1.Dry your power chair as thoroughly as possible with a towel.

2.Allow your power chair to sit in a warm, dry place for 12 hours to allow unseen water to evaporate.

3.Check the joystick operation and the brakes before using your power chair again.

4.If any inconsistencies are found, take your power chair to your Quantum Rehab Specialist. Power chairs that are frequently exposed to sources of water, such as incontinence, should be inspected often for corrosion and electronic components may need to be replaced frequently.

Temperature

!Some of the parts of your power chair are susceptible to extreme changes in temperature. Always keep your power chair between the temperatures of 18° F/-8° C and 122° F/50° C.

!In extremely cold temperatures the batteries may freeze. The specific temperature at which they freeze depends on a number of factors, such as battery charge, usage, and composition of the batteries (e.g., AGM or Gel-Cell).

!Temperatures above 122° F/50° C may cause your power chair to operate at a reduced speed. This reduced speed is a safety feature built into the controller that helps prevent damage to the motor and other electrical components.

General Guidelines

!Avoid knocking or bumping the controller, especially the joystick.

!Avoid prolonged exposure of your power chair to extreme conditions, such as heat, cold, or moisture.

!Keep the controller clean.

!Check all connectors to ensure that they are all tight and secured properly.

!Make sure the pneumatic tires are inflated to 35 psi (2.4 bar) if equipped with pneumatic tires..

WARNING! Make sure your tires are inflated to 35 psi (2.4 bar). Do not underinflate or overinflate your tires. Low pressure may result in loss of control, and overinflated tires may burst. Overinflating tires can cause them to explode.

WARNING! Do not use a high pressure hose to inflate your tires.

!Use a rubber conditioner on the tire sidewalls to help preserve them.

WARNING! Never use a rubber conditioner on the tread area of the tires; doing so may make the tires slippery and cause your power chair to skid.

www.quantumrehab.com

Quantum 6000Z Series

6000Z 4MP, 6000Z 4SP, 6000Z 3SP, 6000Z 4S, 6000Z 3S specifications

Pride Mobility has established itself as a leader in the design and manufacturing of mobility scooters, and the 6000Z series is a testament to this legacy. Comprising models such as the 6000Z 3MP, 6000Z 3S, 6000Z 4S, 6000Z 3SP, and 6000Z 4SP, this series is notable for its blend of functionality, comfort, and innovative technology.

The 6000Z models are built for both indoor and outdoor use, showcasing exceptional maneuverability and stability. They are equipped with powerful electric motors that deliver smooth and efficient performance, allowing users to navigate various terrains with ease. The 6000Z 3MP and 3S models feature a three-wheeled design, which enhances their agility, making them particularly suitable for tight spaces and narrow pathways. In contrast, the 6000Z 4S and 4SP models come with four wheels, offering increased stability and weight distribution for users who may require a little extra support when traversing uneven surfaces.

Each model incorporates advanced suspension systems, ensuring a comfortable ride even over bumpy or uneven ground. The inclusion of large, durable tires further contributes to the overall ride quality by absorbing shock and providing traction. These scooters also feature adjustable seats with padding, allowing users to choose a position that maximizes comfort and accessibility.

In terms of technology, the 6000Z series is equipped with easy-to-use control panels. These controls are intuitive, allowing smooth acceleration and deceleration. Many models also incorporate a digital display that provides essential information such as speed, battery level, and distance traveled, enhancing the user experience. Additionally, the scooters come with LED lighting systems, ensuring visibility and safety during nighttime use.

The construction of the 6000Z series is robust, utilizing high-quality materials designed for durability. The scooters are also lightweight, facilitating easy transport in vehicles. With battery options that allow for extended travel range, users can enjoy longer adventures without the worry of running out of power.

Overall, the Pride Mobility 6000Z series delivers a winning combination of comfort, convenience, and cutting-edge technology, making it an excellent choice for individuals seeking mobility solutions tailored to modern needs. Whether it's daily errands or leisurely outings, these scooters enhance user independence and enhance the quality of life.