Pride Mobility ACN# 088 609 661 manual Required Tools for Bottom Height Adjustment

Page 10

10

Basic Operation Instructions

Required Tools for Bottom Height Adjustment:

νPhillips head screwdriver

ν3/32-in. hex key

ν5/32-in. hex key

To adjust the bottom height:

1.Use the Phillips head screwdriver to remove the four (4) 3/8-in. pan head screws. See figure 6.

2.Use the 3/32-in. hex key to remove the two (2) 5/16-in. flat head screws. Remove the plastic clothing guard.

3.Use the 5/32-in. hex key to remove the two (2) 1/2-in. flat head screws from the detent bar.

4.Slide the armrest up or down.

5.Line up the holes in the armrest.

6.Reinstall the two (2) 1/2-in. flat head screws.

7.Reinstall the plastic clothing guard.

Clothing Guard

3/8-in. Pan Head

Screws

5/16-in. Flat Head Screws

Detent Bar 3/8-in. Pan Head Screws

1/2-in. Flat Head Screws

Armrest Lock Lever Armest Lock

Figure 6. Quick Height Adjustable Drop-in Armrest Bottom Height Adjustment

Specialty Seat Kit

www.quantumrehab.com

Rev A 02-19-03

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Specialty Seat Kit Product Safety Labels Table of Contents Introduction Specialty Seat KitSpecialty Seat Kit Armrest Adjustments Two Post Flip-up Armrest AdjustmentHeavy Duty Removable Armrest Height Adjustment Heavy Duty Removable Armrest Position Adjustment Adult Size Armrest Height Adjustments Quick Height Adjustable Drop-in Armrest AdjustmentsTo adjust the top height Required Tools for Bottom Height Adjustment To adjust the bottom heightPediatric Size Armrest Height Adjustments Three-Year Limited Warranty Warranty ExclusionsBasic Operation Instructions My Authorized Provider Is Page Pride Mobility Products Corporation
Top Page Image Contents