X . O P E R A T I N G G U I D E
A. CONTROL SETTINGS
1.It is vital to match control settings to your level of function and ability.
2.Consult your health care professional and your supplier to select the best control settings for you.
3.Check and adjust the settings every six to twelve months (or more often, if needed).
4.Adjust the control settings immediately if you notice any change in your ability to:
•Control the joystick.
•Hold your torso erect.
•Avoid running into objects.
5.Control Settings are adjusted through the use of the Quickie Integral Programmer (QIP) Pad. See your supplier if you do not own a Quickie Integral Programmer Pad.
Note: Quickie’s Smart Pad Programmer or Smart Box Programmer are not compatible with the Quickie P120 controller.
B. QUICKIE INTEGRAL PROGRAMMER QIP (OPTIONAL)
Program settings beyond the ability of the rider can result in serious injury. Consult your health care advisor before you alter settings.
X . O P E R A T I N G G U I D E
C. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit. This protects the motors from damage due to overheating. In extreme conditions (such as repetitive hill climbing) the circuit will decrease the power to your motors. This allows the chair to operate at a reduced speed.When the motors cool, the chair will return to normal speed.
D. CIRCUIT BREAKERS
1. Notes:
Your Quickie P120 has two styles of battery box; Single (one circuit breaker) and Dual (two circuit breakers, one on each box)
1.Notes:
The Quickie Integral Programmer lets you adjust the control settings of the P120. You can customize a program for yourself or select the standard program.
•acceleration rate
•deceleration rate
•turn acceleration
•turn deceleration
•forward speed
•reverse speed
•turn speed
2.To Program Your Chair:
a. Turn off power to the chair.
b. Insert Integral Programmer Pad plug
(1)into the charger socket.
c.Turn on power to the chair; program as needed.
d.Remove plug and drive chair.
Note: Review the Quickie Integral Programmer Owner’s Manual for more details on how to program your chair. Note: Quickie’s Smart Pad Programmer or Smart Box Programmer are not compatible with the Quickie P120 controller C.
Note: Program settings that are not matched for the capabilities of the rider can result in serious injury. Do Not alter settings without the advice of your health care professional.
1 |
•In the unlikely event of a short circuit or heavy overload, all power to your chair will be shut off.
•To reset your chair, depress the circuit
breaker button(s) on the battery box lids. A few minutes wait is required before the circuit breaker(s) will reset.
2. Repeated Shutdown:
If the chair continues to shut down after resetting, have it serviced by a supplier.
930373 Rev. B | 30 | 31 | 930373 Rev. B |