Unpacking the Lift
Detailed below is the inventory of parts included with your lift. If any parts are missing or if any shipping damage is noted, immediately contact the distributor from which you purchased your lift. DO NOT attempt to install or use the lift with any missing or damaged parts.
Box Contents:
1 Lift Assembly
1Pioneer Platform
1Leg Assembly
1Hardware Pack
1Foot Plate
1Front Wheel Cradle
(For Scooter Applications)
Pioneer Platform
Leg Assembly
Foot Plate
Lift Assembly
Front Wheel Cradle (for Scooter Applications)
Pioneer Hardware Pack:
Owner’s Manual | 1 |
Vehicle Wiring Harness | 1 |
2 Button Hand Control | 1 |
Manual Override Tool | 1 |
Hex Bolts DIA 5/16” x 4” | 2 |
Hex Nuts DIA 5/16” | 2 |
Washers 5/16” | 2 |
Lock Washers 5/16” | 2 |
Installation Washers | 2 |
Butt Connectors | 2 |
Rubber Grommet | 1 |
Tie Wraps | 10 |
|
|
Applications: The Pioneer in its factory setup is intended for the transport of power chairs. With a minor change to the platform the Pioneer can easily be adapted for the transport of three or four wheel scooters. The maximum weight that can be safely lifted by the Pioneer in either setup is 350 LBS. This lift is intended for installation in the enclosed rear cargo area of most vans,