8.6 Footrests
(Photos 14 and 15)
-Use : The footrests have thepossibility to be swung to the exterior and to the interior of the chair.
To take off the footrests, you simply pull them upwards. To replace the footrests gently place the tube A into the support B and aling the footrests with the frame so that they lock into place.
Warning :
-Do not lift the chair by any of the range of footrest/legrest/amputee supports.
-Check that the footrests are fixed correctly before placing your feet on the footplates.
��
�
�
��
�
8.7 Legrests |
| |
(Photos 16 and 17) |
| |
�� | ||
The legrests are footrests that can be angle | ||
| ||
adjusted and also incorporate an adjustable | � | |
cushion to support the leg. |
| |
- Use : To remove, replace and turn the legrests | � | |
follow the instructions for the foorests. |
- Adjustment :
To adjust the angle of the legrests, loosen the
handle A and lift or lower the legrest tube until you have the correct angle and retighten the handle.
To adjust the height of the cushion D loosen the knob C, slide the cushion into the wanted position and retighten the knob C.
8.8 Footplates (Photo 20)
Footplates consist of a support tube and a footplate to be used only to support the foot of the user when seated in the wheelchair.
��
�
�
23