Invacare Recline INSTALLING/REMOVING the S Power Legrests Figure, Removing the Power Legrests

Page 22

PROCEDURE 8

RIGGINGS

 

 

Legrest

Washer

Support

 

Washer

Adjustment

 

Link

R

Button

I

Screw

G

 

G

FIGURE 6 - ADJUSTING GENIUS LEGRESTS -

I

LEGREST HEIGHT/DEPTH

N

 

GINSTALLING/REMOVING THE S POWER LEGRESTS (FIGURE 7)

NOTE: Power legrests are linked to the recline func- tion of the seating system. Operating the recline function automatically operates power legs. Power Legrests can also be operated independently of the recline function.

WARNING

To prevent personal injury, always verify proper positioning of legs and feet prior to use. Individual user weight may impact the rate of travel for each legrest assembly. If simultaneous operation is desired, select a speed which allows for the most uniform travel.

DO NOT insert fingers between legrest components, otherwise personal injury may occur.

CAUTION

Never allow items to become trapped between the legrest assemblies, other- wise damage to the power legrests may occur.

Ensure that all parts of both power legrests are clear of any obstructions before rais- ing and lowering, otherwise damage to the power legrests may occur.

NOTE: Make sure the legrest sits flush on the seat frame.

3.Rotate the power legs toward the inside of the wheelchair until it locks in place.

NOTE: The footplate will be on the inside of the wheelchair whenlockedinplace.

4.Repeat STEPS 1-3 for the opposite legrest.

5.Connect power legrest connector to jumper cable (DETAIL"B").

6.If necessary, adjust powered legs. Refer toADJUST- ING POWER LEGRESTS in this instruction sheet.

Removing the Power Legrests

1.Disconnect power legrests from jumper cable.

2.Push powered legrest release handle toward the op- posite side of the wheelchair and swing legrest to the outside of the wheelchair.

3.Lift UP on powered legrest and remove from wheel- chair.

4.Repeat STEPS 1-3 for opposite power legrest.

DETAIL "B"

Jumper

Cable

Power Leg

Connector

DETAIL "A"

Calf pad

Installing the Power Legrests

1.Turn power legrest to side (open footplate is per- pendicular to wheelchair) and position the mount- ing pin on the legrest with mounting holes on the seat frame (DETAIL"A").

2.Insert the mounting pin of power legrest into the mounting hole of the seat frame (DETAIL"A").

Mounting

Footplate

Pin

 

Legrest Release

Handle

FIGURE 7 - INSTALLING/REMOVING POWER

LEGRESTS

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Tilt Recline Tilt/Recline Seating Systems I N G E C I a L T E S Wheelchair TIE-DOWN Restraints and Seat Positioning StrapsTable of Contents E C I F SpecificationsT I O N S Repair or Service Information General Guidelines ProcedureOperating Information Procedure General Guidelines Weight TrainingWeight Limitation Procedure General Guidelines Stability and Balance SAFETY/HANDLING of Seating SYSTEMS/WHEELCHAIRSPercentage of Weight Distribution Coping With Everyday ObstaclesReaching, Bending Backwards Transferring To/From Other SeatsReaching, Leaning, Bending and Bending Forward Minimize GAP DistanceTroubleshooting Safety Inspection and Maintenance ChecklistSafety INSPECTION/TROUBLESHOOTING Procedure Optional Four-Way Toggle Switch Single Function Toggle SwitchOperating Tilt only Systems Figure Full Upright Position Full Tilt Position Operating Tilt only SystemsOperating Recline only Systems Figure Increasing/Decreasing Recline AngleRecline only Procedure Full Upright PositionC L I N E Operating TILT/RECLINE Systems FigureIncreasing/Decreasing Tilt Angle TILT/RECLINE Procedure Operating TILT/RECLINE SystemsUsing the Optional Ventilator Tray Figure N T I L a T O R A YAbout Vernier Shear Reduction VSR Shear Reduction ProcedureOptional Vernier Shear Reduction E a R D U C T I O NMechanical ELEVATING/ Genius Legrests Procedure RiggingsAdjusting Mechanical Elevating Legrests I N G SRiggings Procedure Adjusting Genius LegrestsRemoving the Power Legrests INSTALLING/REMOVING the S Power Legrests FigureInstalling the Power Legrests Adjusting the Footplate Height Figure Adjusting the Power LegrestsAdjusting the Footplate Outside View of Powered Legs Inside View of Powered LegsAdjusting the Footplate Angle Figures Adjusting the Footplate Depth FigureDetail a Back View Adjusting the Calf PadAdjusting the Calf PAD Width Figure LegrestAdjusting the Length for Power Legrest Figure Adjusting the Calf PAD Height FigureReclining Armrests Armrests ProcedureM R E S T S Replacing Headrest Figure HeadrestDetail a Adjusting the Extended Active ANTI-TIPPERS FigureANTI-TIPPERS E R SWarranty A N T YPage One Invacare Way Matheson Blvd E

Recline specifications

Invacare Recline is a sophisticated and highly adaptable wheelchair designed to enhance the quality of life for users who require recline functionality. Its design focuses on comfort, safety, and ease of use, making it an excellent choice for individuals with various mobility challenges.

One of the standout features of the Invacare Recline is its adjustable reclining backrest. This allows users to find their ideal position, whether they are relaxing, resting, or engaging in daily activities. The backrest can be adjusted effortlessly, often by using a lever or pneumatic mechanism, providing a seamless transition from an upright to a reclined position. This feature is particularly advantageous for users who may experience pressure sores or require occasional changes in posture throughout the day.

The wheelchair is equipped with a durable and lightweight frame, making it easy to maneuver both indoors and outdoors. The construction often includes high-strength aluminum or steel, ensuring stability and longevity while also maintaining a manageable weight for caregivers. This balance of strength and portability enhances the user experience, allowing for a greater degree of independence.

Another important aspect of the Invacare Recline is its customizable seating system. The seating can be tailored to the specific needs of the user, with various options for cushions, back supports, and armrests. This customization not only improves comfort but also promotes optimal positioning and postural support, essential for users who may have specific medical needs.

Incorporating advanced technology, some models of the Invacare Recline include powered options, which allow users to adjust their position with the push of a button. These electric systems are particularly beneficial for individuals with limited upper body strength, enabling them to control their posture and comfort without assistance.

Safety features are paramount in the design of the Invacare Recline. It commonly includes secure locking mechanisms for wheels, anti-tipper features, and safety straps, ensuring that users are secure while reclining or maneuvering. The careful consideration of safety is essential to instill confidence in both users and caregivers.

Overall, the Invacare Recline wheelchair exemplifies innovation and thoughtful design, combining adjustable reclining capabilities with robust technology and customization options. It stands out in the market for its commitment to improving user comfort and independence, ultimately enhancing the quality of life for individuals with mobility challenges.
Top Page Image Contents