Invacare R2 manual #1 Back Pan w/ Vinyl Edge Trim 19-22 Wide, #2 Back Cushion Assembly 16-18 Wide

Metal Curved Back Assembly

NOTE: Curved Back mounts only to back canes without a 10 degree bend.

NOTE: As of 8/15/08 the Curved Back material changed from ABS Plastic to Metal as inventory runs out. You must ask the customer if they have an ABS Plastic or the Metal Curved Back model when replacing components. All service replacement Back Assemblies with Hardware shipped will be metal. New Headrest Mounting Hardware is required when replacing an ABS Curved Back with a Metal Curved Back.

#1 Back Pan w/ Vinyl Edge Trim - 19"-22" Wide

Overall		Material	19" Wide			20" Wide		21" Wide		22" Wide
Back Height	Back Height
16"	11"		1157859			1157870		1157881		1157892
17"	12"		1157860			1157871		1157882		1157893
18"	13"		1157861			1157872		1157883		1157894
19"	14"		1157862			1157873		1157884		1157895
20"	15"		1157863			1157874		1157885		1157896
21"	16"		1157864			1157875		1157886		1157897
22"	17"		1157865			1157876		1157887		1157898
23"	18"		1157866			1157877		1157888		1157899
24"	19"		1157867			1157878		1157889		1157900
NOTE: Hook Fastener	Adhesive Kit must be ordered when a Back Pan				or Back Assembly is			requested. This will allow		the Loop Fastener
Adhesive on the Back Cover to attach properly.
		#2 Back Cushion Assembly - 16"-18" Wide
Overall		Material		16" Wide			17" Wide			18" Wide
Back		Back
Height		Height
16"		12-1/2"		1160207			1160218		1160229
17"		13-1/2"		1160208			1160219		1160230
18"		14-1/2"		1160209			1160220		1160231
19"		15-1/2"		1160210			1160221		1160232
20"		16-1/2"		1160211			1160222		1160233
21"		17-1/2"		1160212			1160223		1160234
22"		18-1/2"		1160213			1160224		1160235
23"		19-1/2"		1160214			1160225		1160236
24"		20-1/2"		1160215			1160226		1160237
NOTE: Back cover and foam		are sold as a Back Cushion		Assembly only.

Form No. 01-039

33

To order call toll free 1-800-333-6900, or www.invacare.com