Install the Walker Tray
NOTE: For this procedure, refer to FIGURE 2.
On both sides of the walker, snap a tray support brace onto the front side brace as shown in FIGURE 2.
NOTE: Make sure that the walker tray is secure before use.
Storing the Walker Tray
NOTE: For this procedure, refer to FIGURE 3.
NOTE: The walker tray can be rotated to lie flat against the walker pivot brace when not in use.
1.Pull up on the back of the walker tray.
2.Push the tray forward and down until it sits flat against the walker pivot brace.
NOTE: To use the walker tray, pull the walker tray up and around the walker pivot brace until it locks into place.
Removing the Walker Tray
To remove the walker tray, pull each tray support brace away from the front side frames.
Cleaning
NOTE: Before using any cleaning products, test an area on the bottom of the walker tray to make sure the product does not cause discoloration or staining. DO NOT use an abrasive detergent or cleaner to clean the walker tray.
Use water and a mild, non‐abrasive cleaner to clean the walker tray.
Cutout in Tray
Support Brace
Rests on Front Side
Brace
Tray Support
Brace
FIGURE 2 Install the Walker Tray
Walker Tray | 2 | Part No 1160851 |