Invacare 7400036, 7400037 Converting from Patient Operated Wheel Locks Figure

CONVERTING FROM PATIENT OPERATED WHEEL LOCKS (FIGURE 4)

NOTE: Refer to INSTALLATION WARNING in the SAFETY SUMMARY in this instruction sheet.

1.Remove the existing axle mounting screw and locknut that secures the rear portion of the patient operated wheel lock assembly, pivot arm spacer and rear wheel to the wheelchair frame.

2.Remove the 5/16-inch mounting screw, bushing, washer, and locknut that secures the strap and stud assmebly of the patient operated wheel lock to the wheelchair frame.

3.Secure the rear wheel to the wheelchair frame with the axle mounting screw and the 3/4-inch spacer provided. Securely tighten.

4.Install the attendant operated wheel locks. Refer to REPLACING THE ATTENDANT OPERATED WHEEL LOCKS in this instruction sheet.

STEP1

Locknut

Rear Portion of the Patient

Operated Wheel Lock

	Axle Mounting
	Screw
Wheelchair
Frame
Pivot Arm
Spacer
	Rear Wheel
STEP2	STEP3
5/16-inch
Mounting Tube Clamp	Wheelchair	Locknut
Screw	Frame

Axle

Mounting

Screw

Thin

Washer

		Spacer
		Rear
	Locknut	Wheel
Bushing

Strap and Stud Assembly of the

Wheelchair Patient Operated Wheel Lock

Frame

FIGURE4-CONVERTINGFROMPATIENTOPERATEDWHEELLOCKS

3