Assembly, Installation and Operating Instructions
Model No. 1335
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Safety Summary
To ensure the safe and proper installation and adjustment of the
WARNING
DO NOT use this equipment without first reading and understanding this instruction sheet and the owner’s manual supplied with the product. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.
DO NOT overtighten the attaching hardware when securing the
The
DESCRIPTION | QUANTITY |
|
|
Lug Bolt | 1 |
|
|
Locknut | 3 |
|
|
1 | |
|
|
Hex Head Bolt | 2 |
|
|
Plastic Insert Guide | 2 |
|
|
NOTE: If the
NOTE: The
Installing the Non-Folding Device
NOTE: For this procedure, refer to FIGURE 1.
1.Remove the locknut and the hex head bolt from the clamps at both ends of the
2.Loosen, but DO NOT remove the locknut on the lug bolt on the adjustment clamp.
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No. 00083x072 | 1 |
|