Zipper Faces Back of Chair
Loop Portion of
Fastening Strip
(Attached To
Seat)
Double Sided
Hook Portion of
Fastening Strip
Seat
Front of Cushion Lines up with the Front Edge of Seating Surface
Seating Surface
Front of Seat
Mounting
Hook
Locations
Rear of Seat
FIGURE 1- ATTACHING/ REMOVING
SEAT TO/FROM SEATING SURFACE
ATTACHING/ADJUSTING THE CUSHION/BASE MOUNTING HOOKS TO BASE (FIGURE 2)
NOTE: Refer to FIGURE 2 in this instruction sheet for mounting hook locations.
1.For minimal width adjustment, loosen the mount- ing screws and adjust the hooks in or out and retighten the mounting screws.
2.For front-to-back position adjustment:
A.Remove the mounting screws that secure the mounting hooks to the seat.
B.Adjust the mounting hooks to desired mount- ing position.
C.Reinsert the mounting screws. Securely tighten.
3.If all attachments and adjustments are complete, zip the back cover closed.
Mounting Hooks and Screws
FIGURE 2- ATTACHING/ ADJUSTING THE
CUSHION / MOUNTING HOOKS TO THE BASE
SEAT INSPECTION AND CLEANING
Inspection
NOTE: In order to ensure that the cushion is working as designed, inspection and cleaning of the cushion on a regular basis is necessary.
WARNING
DO NOT continue to use this product if deforma- tion,corrosion,breakage,wearand/orcompres- sion is discovered. Corrective maintenance can be performed at or arranged through your equip- ment supplier.
1.Once a week, visually inspect all parts, including hardware, upholstery materials, foams (if accessible), and plastics for deformation, corrosion, breakage, wear and/or compression.
Cleaning
1. Perform one (1) of the following Once a week:
2