Cleaning Mechanism

CS-XE9EKE/XE12EKE

Automatically Traps, Vacuums and Exhausts Dust

— For Clean Operation without the Cleaning Hassle

Original vacuum device

Air filter

Traps the dust from the intake air.

Dust exhaust and air ventilation fan

Exhaust duct

Trapped dust is automatically exhausted outside.

	The vacuum nozzle moves to trap the dust
	The nozzle automatically starts cleaning the filter after each
	use. The cumulative operating time is used to
Traps	determine how much of the filter
	needs to be cleaned. The entire
1	filter is cleaned when the
	operating time reaches 36 hours.	The filter surface is divided into 12 blocks
	*The timer can also be set to start cleaning
		to ensure thorough cleaning.
	at a certain time.

The blue LED lights to show the operating status.

Vacuum duct

The vacuum duct carries

the trapped dust to the outside.

	The vacuum duct vacuums the dust
	The pad on the nozzle rubs the dust from the filter mesh,
Vacuums	and the trapped dust is then vacuumed and exhausted
	through the vacuum duct.
2	1 Pad: The brush rubs dust from the
	filter. A durable, wear-resistant silicon
	foam material is used.	2
	2 Suction port: The rubbed off dust is
	vacuumed.	1
	The exhaust duct discards

Exhausts	the dust outdoors automatically
	The dust goes through the vacuum duct to be exhausted. This
3	is done automatically, so you don't have to do a thing. And only
	a small amount of dust is exhausted each time.

Why does the filter have to be cleaned?

The filter works to trap airbone dust. When the filter is not
cleaned regularly, dust can accumulate and clog it.				Dust
Problems Caused by Filter Clogging
Lower	Lower	More	Unpleasant
Air
	Efficiency	Noise	Odours
Volume
				Approx. 8 g* of

Dead dust mites

Pollen

Mould spores

Viruses/bacteria

Actual dust accumulation will vary depending on usage and environmental conditions.

•For best performance, it is recommended to install the air conditioner in a room away from oily area e.g. kitchen. 07