Invacare 00-313 manual Invacare Tarsys 2G Power Tilt and Recline Seating Systems, Overall Length

Invacare® Tarsys® 2G Power Tilt and Recline Seating Systems

2G Tilt and Recline Specifications

Dimensions			FWD		RWD
	Seat width*		16''-22''		16''-22''
	Seat depth		16''-22''		16''-22''
	Back height (cane)		20''-26''		20''-26''
	Overall width		25.25''		24.75''
	Overall length
	(from headtube to active anti-tipper)				Short	Long
		With vent tray	37''		38.5''	41.5''
		Without vent tray	34''		31.5''	34.5''
	Overall height (to top of 22'' cane)		41.25''		40.5''
	Seat-to-floor height (based on 16'' depth)
		At 0°	19.25''		18.5''
		At 5°	20.25''		19.5''
Weight capacity – consumer
	With vent tray		185 lb. / 285 lb. with HD pkg.		185 lb. / 285 lb. with HD pkg.
	Without vent tray		250 lb. / 350 lb. with HD pkg.		250 lb. / 350 lb. with HD pkg.
Product weight
	Without base		105 lb.		105 lb.
	With base (not including batteries)		300 lb.		260 lb.
Electronics			Standard		Optional
	2GT		single toggle		TAC
	2GR		TAC		TRCM
	2GTR		TRCM		n/a
				Actual back material height
Back height			Tilt only		Recline/VSR
			Curved ABS†	Profile	Curved ABS§	Profile
	20''		16.25''	n/a	11.25''	n/a
	21''		17.25''	n/a	12.25''	n/a
	22''		18.25''	n/a	13.25''	n/a
	23''		19.25''	16''	14.25''	n/a
	24''		20.25''	18''	15.25''	n/a
25''			21.25''	n/a	16.25''	16''

* 23'' and 24'' available through special order.

†On the 2GT, there is a 3.75'' gap from the seat pan to the bottom of the back. This allows for the cushion and cannot be reduced.

§On the 2GR and 2GTR, there is an 8.75'' gap from the seat pan to the bottom of the back cushion. This allows for 5'' of VSR movement plus 3.75'' to the back-cane pivot point. This can be reduced by ordering a special longer back but will limit the VSR movement.

Overall Length

The following dimensions were measured from the front of the seat pan to the rear of the anti-tippers.

			Seat Depths
Short Base		16"	17"	18"	19"	20"
	GB motors with 2GT or 2GTR	29.25"	30.25"	30.25"	31.25"	32.25"
	GB motors with 2GR	29.25"	30.25"	30.25"	31.25"	31.25"
	4-Pole motors with 2GT or 2GTR	29.25"	29.25"	29.25"	30.25"	31.25"
	4-Pole motors with 2GR	29.25"	29.25"	29.25"	30.25"	31.25"
Long Base		18"	19"	20"	21"	22"
	GB motors with 2GT or 2GTR	33.25"	34.25"	34.25"	35.25"	36.25"
	GB motors with 2GR	33.25"	34.25"	34.75"	35.75"	36.75"
	4-Pole motors with 2GT or 2GTR	32.25"	33.25"	33.25"	34.25"	35.25"
	4-Pole motors with 2GR	32.75"	33.75"	34.75"	35.75"	36.75"

The following dimensions need to be added to the above in order to obtain overall length for the various options on chair.

Option	Add
Extended anti-tippers	4.5"
Extended anti-tippers and ventilator tray*	12"
Center Pivot Style Front Riggings
70NHD- 70˚ swingaway footrests	11.5"
70STAPER- 70˚ tapered footrests	10"
AT5544- Elevating legrests	15"
ELRPW- Powered elevating/articulating legrests	14.5"
Pin Style Front Riggings
PW93- swingaway footrests	14.5"

* Extended anti-tippers come standard with ventilator tray.

10