IBM 5697-VM3 manual Vmfins install ppf 5654A09A Adsm Adsmsfs plan nomemo

VMFINS276

VMFINS19

VMFINS276

Ready;

8 Obtain resource planning information for Tivoli ADSM for VM.

Note: The product will not be loaded by the VMFINS command at this time.

vmfins install ppf 5654A09A {ADSM ADSMSFS} (plan nomemo

Use ADSM for installing on minidisks or ADSMSFS for installing in Shared File System directories.

The PLAN option indicates that VMFINS will perform requisite checking, plan system resources, and provide an opportunity to override the defaults in the product parameter file.

You can override any of the following:

the name of the product parameter file

the default install user ID

minidisk/directory definitions

Notes:

a. If you change the PPF name, a default user ID, or other parameters via a PPF override, you will need to use your changed values instead of those indicated (when appropriate), throughout the rest of the installation instructions, as well as the instructions for servicing Tivoli ADSM for VM. For example, you will need to specify your PPF override file name instead of 5654A09A for certain VMSES/E commands.

b. If you're not familiar with creating PPF overrides using VMFINS, you should review the "Using the Make Override Panel" section in Chapter 3 of the VMSES/E Introduction and Reference before you continue.

c. For more information about changing the VMSYS file pool name refer to Chapter 3 in the VMSES/E Introduction and Reference.

Installation Instructions 17