Harmar Mobility AL010, AL030 manual Wiring the Vehicle, Do not attach the red wire yet

Page 3

Section 2 - Wiring the Vehicle

Important Note: IMPROPER WIRING IS THE #1 CAUSE OF PROBLEMS IN THE OPERATION OF A VEHICLE LIFT.

FOLLOW THE WIRING INSTRUCTIONS CAREFULLY

Located in the hardware package is the vehicle wiring harness. The harness is manufactured to, and complies with the SAE J1128 requirements. The wire harness is approximately 23 ft. long and will accommodate most vehicles.

Unwind the harness and lay it flat. One end of the harness has a black plug . This is the lift end of the harness and goes to the back of the vehicle.

To vehicle's battery

To back of vehicle

Begin routing the wiring harness at the vehicle battery. Attach the black wire to the negative terminal on the battery.

Do not attach the red wire yet.

 

RE

CK

WI

 

BLA

 

 

RE

CK

WI

 

BLA

 

OR

Side mount

Top mount

Run the wiring harness under or when possible through

the vehicle, back to the trailer hitch. Always locate the wiring harness where it can not be snagged by road debris and away from the vehicles gas tank.

If the harness is too long for the vehicle, coil the excess wire and secure it to the vehicle frame with the supplied tie wraps. Do not cut or shorten the harness. Secure the plug about even with the end of the hitch receiver tube.

Attach the red wire to the positive terminal on the battery.

RED WIRE

OR

 

 

IRE

D

W

 

RE

 

Side mount

Top mount

Important Reminder: Never attempt to attach the wire harness

 

to a secondary power source, The lift requires direct connection

 

to the battery.

 

Caution: When the installation requires the wiring harness be run on the underside of a vehicle,

route the harness away from the exhaust system, brake lines, fuel lines, gas tank, pinch points, and sharp edges. Locate the wiring harness where it can not be snagged by road debris.

Manufactures Recommendation: Schedule a routine maintenance visit with the end user. Harmar recommends the lift be greased in the applicable areas, and the wire harness connections be checked for corrosion, and/or decay, as such conditions are normal due to environmental changes.

Image 3
Contents B I L I T Y Unpacking the Lift Hitch PostOptional Class OptionalDo not attach the red wire yet Wiring the VehicleVehicle Preparation For AL030 onlyInstalling the Lift no Swing Away option Installing the Lift with Swing Away option Operating the Swing Away Option Opening the Swing AwayClosing the Swing Away Operating the AL010 Micro Scooter Lift Unloading Your Scooter Loading Your Scooter on the LiftOperating the AL030 Manual WheelchairLift Operating the AL030 Power Tote for Manual Wheelchairs Loading Your Wheelchair on the LiftUnloading Your Wheelchair AL010 and AL030 Hold Down ARM Adjustment Adjusting the AL010 and AL030Safety & Maintenance SafetyLift does not operate Troubleshooting guideAL010 Micro Scooter Lift ActuatorItem # Description AL030 Power Tote Manual Wheelchair Lift

AL030, AL010 specifications

Harmar Mobility is a leading name in mobility solutions, and its AL010 and AL030 vehicle lifts showcase the company’s commitment to innovation and quality, catering to the needs of individuals requiring enhanced mobility.

The Harmar AL010 is a versatile and robust lift designed for transporting power wheelchairs and scooters. One of its standout features is the innovative adjustable cradle, which accommodates a wide range of mobility products. This adaptability means users can switch between different types of scooters or power chairs without needing to alter or replace the lift, providing significant convenience and value.

One of the key technologies integrated into the AL010 is its patented folding design. This feature ensures that when not in use, the lift can be compactly stored, leaving ample space in the vehicle for other passengers or cargo. Additionally, the lift operates via a remote control, making it user-friendly and easy to operate for individuals with limited mobility. Safety is paramount, and the AL010 incorporates a durable safety strap system to secure the mobility device during transit, minimizing any risk during travel.

On the other hand, the Harmar AL030 provides a heavier-duty option for larger or heavier mobility devices. This lift features extra-strength materials and an extended weight capacity, ensuring it can handle the demands of various mobility devices without compromising on safety or performance. The AL030 is also designed with user convenience in mind. It boasts a powerful lift mechanism that enables smoother transitions between ground level and vehicle height, making it ideal for users who may struggle with lifting or maneuvering their devices.

Both the AL010 and AL030 utilize advanced motor technology for reliable and consistent operation. The lifts are engineered for durability, featuring corrosion-resistant materials that ensure they withstand different weather conditions, making them suitable for year-round use. Their compatibility with most vehicles provides versatility, allowing users to choose from various vehicle types, from SUVs to vans.

In summary, the Harmar Mobility AL010 and AL030 vehicle lifts epitomize robust design and functional technology. With features like adjustable cradles, remote control operation, and high weight capacities, these lifts offer invaluable support for individuals seeking independence and mobility. Harmar Mobility continues to push boundaries in mobility solutions, ensuring that users can pursue an active and fulfilling lifestyle with ease.