Panasonic VL-GC001A installation and operation guide Installing the door station

Page 9

Introduction and Installation

Installing the door station

Make sure to install the door station on a flat, vertical wall.

Important information:

On the bottom surface of the door station, there is a hole to allow water to drain. Do not cover it up when installing.

1 Unscrew the hex-head screw using the longer end of the allen wrench and remove the mounting bracket from the rear of the door station.

L The pin hole camera is not a screw to be touched or removed.

Mounting bracket

Pin hole camera

Hex-head screw (Attached to the door station)

Allen wrench

9

Image 9

Contents Thank you for purchasing a Panasonic Door Station Installation and Operation GuideImportant Information Important Information Important safety instructionsFor best performance Additional safety informationQuantity Included itemsFront view Rear view Camera Location of controlsMicrophone Call Button Speaker Water drain holeBefore installation Wire type and distance Installing the door station Non polar Screw Wire Not included Introduction and Installation Introduction and Installation Important information CleaningTechnical data about this product FCC and Other Information For your future reference Panasonic Puerto Rico, IncCopyright