7 . INSPECTION AND MAINTENANCE
7.3BATTERY, FUSE AND TIRE ■ Battery
Refer to the section entitled “6. BATTERY CHARGING AND CARE”.
■ Fuse
If the battery charger is turned on and no LED’s are lit, check the fuse.
& Suggestion
Ask for help from your dealer to inspect or replace the fuse, since the tiller shroud has to be removed first before you can replace the fuse.
■ Tires
The condition of the tires depends on how you drive and use your scooter.
♦Please check the tread depth regular.
♦Replace the tires when the tread depth is less than 0.5 mm.
F Attention
1.When tread depth is below 0.5mm it can easily lead to vehicle slippage, making braking distances longer. Therefore replace the tires as early as possible when they are found to have insufficient tread depth.
2.The T3D scooter comes with solid tires so there is no need to check tires pressure.
7.4STORAGE
Make sure the scooter is stored under the following circumstances:
-Ensure the seat is set in the “Forward”position
-Ensure the scooter is switched off
-Ensure the charger is disconnected when not in use
& Suggestion
Please store the scooter in a location where it is out of direct sunlight, rain, or dew. When storing for a long time, please charge the battery to full power and then disconnect the battery terminal. For details inquire to your dealer.
21