Drive Medical Design Mobility Scooter owner manual Stopping, Labeling

SAFETY NOTICE

STOPPING

1.Release the speed control lever completely. The vehicle will naturally brake and stop.

2.Turn the power switch to (OFF). Then pull out the key.

LABELING

Please carefully read all labels on the scooter before driving it. For your future reference, do not remove them.

WARNING

•Do not operate the scooter unless the handle bar is in a lock position.

•Do not lean against or pull forward on the handle bar while mounting or dismounting from the scooter. Serious harm or injury can occur.

Never lift the scooter up by the shroud

The manufacturer disclaims all responsibility for any personal injury or property damage which may occur as a result of improper use of its products.

WARNING

Radio waves may affect scooter control.

Radio wave sources, such as radio stations, amateur radio (HAM) transmitters, two-way radios, and cellular phones, can affect powered motorized scooters. Following the warning listed below should reduce the chance of unintended brake release or powered scooter movement which could result in serious injury.

1.Do not turn ON hand-held personal communication devices, such as citizens band (CB) radios and cellular phones, while the powered scooter is turned ON.

2.Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them.

3.If unintended movement or brake release occurs, turn the powered scooter OFF as soon as it is safe.

4.Be aware that adding accessories or components, or modifying the powered scooter, may make it more susceptible to interference from radio wave sources. (Note: There is no easy way to evaluate their effect on powered scooter.)

5.Report all incidents of unintended movement or brake release to the powered scooter manufacturer, and note whether there is a radio wave source nearby.

7