Specifications
Load Capacity | 1500 lb. |
|
|
Ramp Length | 69" |
|
|
Ramp Width | 45" |
|
|
Important Safety Information
1.Before use:
a.Read and understand manual.
b.Inspect before every use; do not use if parts loose or damaged.
c.Turn vehicle’s ignition OFF and set parking brake.
d.Clean dirt, oil and debris off ramp(s) and allow ramp(s) to dry.
e.Unfold ramp(s) completely.
f.Set up only on solid, level, dry surface.
g.Turn ramp(s) so flange end faces downward. Position ramp(s) so that tongues fully contact tailgate.
h.Properly connect safety chains. Load vehicle slowly. Do not ride vehicle down ramp(s).
2.Do not exceed 500 lb. capacity per separated panel or 1,500 lb. capacity evenly distributed across joined ramp. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
3.Use safety chains as intended only.
4.Use as intended only.
5.Do not use:
a.as ladder,
b.if tailgate on carrying vehicle is higher than 34”, or
c.to load vehicle with wheel width wider than ramp.
6.Ground contact. Use your Ramps on a solid, level, flat, dry surface. Make sure the Tongue edge fully contacts the tailgate of the vehicle.
7.Clean Ramps. Prior to each use, clean dirt, oil, or any debris off ramps.
8.The Ramps are not designed to be used separately.
9.Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
10.This product is not a toy. Do not allow children to play with or near this item.
11.Maintain product labels and nameplates. These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
12.Load vehicle slowly. Do not ride a vehicle up or down the load ramp.
Page 2 | For technical questions, please call | Item 90018 |