Tanita HD-372F Features, Before Use, Placing Scale, Instructions for Use, Care and Maintenance

HD-372_D 2005.4.21 10:52 AM Page 3

Features

•Digital accuracy and reliability.

•Elegant, contemporary styling.

•Durable construction, non-skid surface.

•“L” message appears when the lithium battery needs replacing.

•Back light display using 9 volt battery

Before Use

Pull-off the protective tab from the battery.

Select your preferred weight mode using the Weight Mode Switch.

1 2

Placing Scale

The scale should be used on a hard even surface for accurate weighing. Not recommended for use on carpeted surfaces. Placing scale on a very soft, deep pile rug may affect weighing accuracy.

Instructions for Use

Gently tap the center of the scale with your	FIG. 1	FIG. 2
foot. When “00.0” shows on the display, step
on the scale (Fig. 1).
Stand still while the LCD flashes “00.0” for
3 seconds. The LCD will display your weight
(Fig. 2). If you step off from the scale, your
weight will be displayed for 5 seconds then	TAP HERE
the scale will automatically shut off. If you
remain on the scale, the weight will be displayed for 10 seconds then
automatically shut off.

Note: If you step on the scale without tapping the platform, the display will show “Err” for 2 seconds then automatically shut off.

Once the scale displays “00.0”, if you do not step on the scale in 10 seconds, the scale will automatically shut off.

“Err” will appear on the display when the scale’s weight capacity is exceeded.

Care and Maintenance

•Place the scale in an area free from heating equipment, high humidity, or extreme temperature changes.

•Never submerge the scale in water or spill chemical liquids on it. To clean, use a dampened cloth and mild detergent.

•Avoid excessive impact or vibration to the unit.