used to style your beard during trimming. The set also includes a cleaning brush and lubricating oil for maintenance purposes. All components fit into the practical holder (6).
•Remove the protective cap (a), and fit the required cutting head on the trimmer unit.
•Turn the cutting head slightly in a clockwise direction when putting it on and slightly
•Fit the guide combs onto one of the two cutting heads mentioned above by inserting the front edge of the cutting head behind the two pins at the front end of the guide comb and then pressing down on the back end of the guide comb until it clicks into place. Set the required beard length using the slide control at the top of the guide comb. Remove the guide comb by lifting up its back end and pulling it off.
•Push the on/off button upwards to switch the trimmer unit on and downwards to switch it off.
Applications
The nose/ear hair trimmer with rotating blades is used to remove unwanted hair growth in the nose and ears.
The beard/sideburn trimmer is used to trim your beard and sideburns.
The beard thinning trimmer is used to thin out and shape your beard and moustache.
The minishaver is used to trim short hair at the edges of the beard and moustache, but is not suitable for actual shaving.
The guide combs can be fitted onto the beard/sideburn trimmer or the beard thinning trimmer. They provide a beard length of between 2 and 16 mm, depending on the guide comb and setting selected.
MAINTENANCE
Lubricate the beard thinning trimmer and beard/sideburn trimmer with the accompanying oil approximately once a month or as required. Apply
20