Panasonic PMPU2000 manual Surveillance Solutions

i-PRO Encoders/Decoders and Converters

SURVEILLANCE SOLUTIONS

Video Encoder

Model	WJ-GXE500
Product Type	4CH Video Encoder
Supported Video Compression	H.264 / MPEG-4 / M-JPEG
Video Inputs/Outputs	4 (Input)
Audio Inputs/Outputs	1 (Input)
Supported Video Resolution	D1 (720 x 480), VGA (640 x 480),
	QVGA (320 x 240)
Max. fps	30fps/ch at H.264 in all resolutions
Coax PTZ Control	4 (for Panasonic camera)
RS485 Camera Interface	1x RS485, 2/4 wire. Half duplex
	(for 1-4 CH).
Network I/F	1x 10/100 Base-TX
SD Memory Card Slot	Yes (SDHC)
SD Card Recording	1fps (JPEG)
Functions	Face Detection (CH1 only), Dual
	Stream, RTP over HTTP
Power/Power Consumption	PoE, 12VAC/6W
Rack Mountable	Optional (3 units for 1U)
	(WV-Q204/2S)

Video Decoder

Model	WJ-GXD400
Product Type	6CH HD1080i Video Decoder
Supported Video Compression	H.264 / MPEG-4 / M-JPEG
Video Inputs/Outputs	HDMI x1 (Output)
	NTSC Composite (BNC) x1 (Output)
Audio Inputs/Outputs	HDMI x1 (Output)
	RCA x1 (Output)
Supported Video Resolution	1.3MP (1280 x 960), VGA (640 x 480),
	QVGA (320 x 240)
	Single (1x 1280 x 960), 3 split-screen
Display Pattern	(1x 1280 x 960, 2x VGA),
	6 split-screen (6x VGA)
Max .fps	30fps/ch at H.264 in VGA
Network I/F	1x 100/1000 Base-T
Functions	HD1080i HDMI Output
Power/Power Consumption	12VDC/12VDC, 1.4A
Rack Mountable	Optional (2 units for 1U)
	((WV-Q204/1S,WV-Q204/2S)

SECURITY

Center Adapter Camera Adapter

Model		BY-HPE11KTA
	(including 1x center adaptor and 1x camera adaptor)
Product Type		Coaxial-LAN Converter with PoE Function
	Center Adaptor			Camera Adaptor
Transmission Speed (UDP) *1		45Mbps or higher
	(when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km])
Transmission Speed (TCP) *1		35Mbps or higher
	(when using an RG-59/U coaxial cable of less than 3,937 ft. [1.2km])
		Without PoE function:
Max. Transmission Distance	Max. 6,561 ft. [2km] (w/ RG-6/U) / Max. 3,937 ft. [1.2km] (w/ RG-59/U)
		With PoE Function:
	Max. 1,640 ft. [500m] (w/ RG-6/U) / Max. 656 ft. [200m] (w/ RG-59/U)
Coaxial I/F	1x BNC			1x BNC
Network I/F	1x 10/100 Base-TX			1x 10/100 Base-TX, PoE *2
Functions		PoE capability for IP cameras
		Plug & Play (No Setup Required)
Operating Temperature	32ºF to 122ºF (Center adaptor)			14ºF to 122ºF (Camera adaptor)
Power	100-240VAC		Power supplied through the coax cable from the center
				adaptor
Power Consumption	Max. 28W (including the power consumption of the camera			Max. 15.4W (PoE capability)
	adaptor)
Rack Mountable	Optional (4 center adaptors for 1U)			-
	(BY-HCA10A)

*1 This value is for transmission between the center adapter and the camera adapter. *2 PoE function is available for Panasonis IP cameras only.

692 View our searchable electronic catalog at: www.jenne.com • 800-422-6191