Omega HH503 manual Operator Maintenance, Battery Replacement

Page 11

OPERATOR MAINTENANCE

WARNING

To avoid possible electrical shock, disconnect the thermocouple connectors from the thermometer before removing the cover.

Battery Replacement

Power is supplied by a 9 volt "transistor" battery. The " " appears on the LCD display when replacement is needed. To replace the battery, remove the two screws from the back of the meter and lift off the battery cover. Remove the battery from battery contacts.

9

Image 11
Contents HH503 Servicing North America Introduction Safety InformationElectrical SpecificationsEnvironmental Operating Instructions Power SwitchF Selecting the Temperature Scale Hold Mode only Main displayJ T1 Input Thermocouple Type Select MIN MAX with Time record ModeREL Relative mode Sec. Minu. Selecting the Time scale 12 Hi/Lo Limits mode only Main display Relative value Recall display mode11 Hi/Lo Limits value Recall display mode Battery Replacement Operator MaintenanceCalibration Procedure Page Page WARRANTY/ Disclaimer Temperature