Omega OS643 manual

Page 11

4.Emissivity

All objects emit invisible infrared energy. The amount of energy emitted is proportional to the object's temperature and its ability to emit IR energy. This ability, called emissivity, is based upon the material that the object is made of and its surface finish. Emissivity values range from 0.10 for a very reflective object to 1.00 for a black body. Factory set emissivity value of 0.95, which cover 90% of typical applications.

5.If the surface to the measured is covered by frost or other material, clean it to expose the surface.

6.If the surface to be measured is highly reflective, apply masking tape or matt finish black paint to the surface.

7.If the meter seems to be giving incorrect readings check the front cone. There may be condensation or debris obstructing the sensor; clean per instructions in the maintenance section.

9

Image 11
Contents Omega Omega.comTM Introduction Safety InformationPage General SpecificationsElectrical Page Push buttons Operating InstructionsOperation Measurement Considerations Page Battery Replacement MaintenanceCharcoal powder Warranty Return Requests / Inquiries 2983/0799