CV-SERIES — RULES FOR SAFE OPERATION
RULES FOR SAFE OPERATION
WARNING
Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
The following safety guidelines should always be used when operating the
GENERAL SAFETY RULES
■DO NOT operate or service this
equipment before you read, understand, and comply with all safety messages in this manual. The manual must be kept availableandaccessibletotheoperator.
■This equipment should not be operated by persons under the minimum statutory age limit.
■Keep untrained personnel away. DO NOT let visitors contact the vibrator unit. All visitors should be kept away from the work area.
■NEVER operate a vibrator motor while under the influence of drugs, alcohol, or medications that may impair the senses or reactions.
■NEVER use this machine for any purpose other than those described in this manual.
■Dress properly. Wear appropriate clothing and protective safety equipment. Wear clothing that will not likely become caught in the equipment or snag on the forms. Eye, hand, hearing, and foot safety equipment is required.
■NEVER use accessories or attachments which are not recommended by the manufacturer for this equipment. Damage to the equipment and/or injury to user may result.
■Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties. Any modification which could lead to a change in the original characteristics of the machine should be made only by the manufacturer who shall confirm that the machine is in conformity with appropriate safety regulations.
■Replace nameplate, operation and safety decals when they become difficult to read.
■Always observe all applicable compulsory regulations relevant to environmental protection, especially, fuel storage, the handling of hazardous substances, and the wearing of protective clothing and equipment. Instruct the user as necessary, or, as the user, request this information and training.
VIBRATOR MOTOR OPERATION SAFETY RULES
■Keep work area well lit.
■Keep work area clean and well organized. A cluttered area invites injuries.
■ALWAYS clear the work area of any debris, tools, etc. that would constitute a hazard while the vibrator motor is in operation.
■ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using vibrator motor.
■DO NOT overreach. Keep proper footing and balance at all times.
■Secure forms. Make sure the form work is well made and braced to withstand the stresses made by vibration.
■ALWAYS check the vibrator motor for loosened hardware such as nuts and bolts before starting.
■Keep vibrator motor clean for better and safer operation.
■Inspect motor cord periodically and if damaged, have it repaired by an authorized service facility.
■Before each use ALWAYS check the motor to make certain there are no damaged parts, and that all parts function properly, (examples: switch, cord housing). If any damage or malfunctioning parts are found, have them repaired or replaced by an authorized service facility.
■Use only factory authorized identical replacement parts.