3 Usage
3.1Using the Oxygen Holder
For this procedure, refer to FIGURE 1.
Reverse STEPS
1.If necessary, loosen but DO NOT remove the mounting knob.
2.Install the oxygen holder into the accessory tube.
3.Install the mounting knob to secure the oxygen holder to the accessory tube.
4.Loosen the two adjustment knobs.
5.Install the oxygen cylinder into the oxygen holder.
6.Tighten the two adjustment knobs to secure the oxygen cylinder to the oxygen holder.
Adjustment Knob
Oxygen Holder 
Adjustment
Knob
Accessory Tube | Mounting Knob |
FIGURE 1 Using the Oxygen Holder
Part No 1164890 | 3 | Oxygen Holder |