4 Error Messages
4 Error Messages
(
If a persistent error message appears or the scale locks up, disconnect then reconnect the scale to the power supply. If the scale remains inoperative, contact your authorised service agent.
Display | Weight | Balance |
overflow | unsteady | failed |
UnderOver
rangerange
Display overflow error
The load on the weighpan exceeds the scale capacity.
Balance failed error
On power up the weight is out of the allowed zero range. Check there is no load or debris on the weighpan.
Error codes:
E10 Battery failure. Replace the batteries.
E30 Management mode not exited correctly.
E 35 Prohibited function.
E151 Configuration change in Management mode has failed.
E152 Prohibited function.
Contact your authorised service agent if the scale remains inoperative or you see any other error message code.
| 15 |