© Siemens AG 2013
LOGO! App from Siemens
The free of charge LOGO! App enables you to monitor actual process values of your LOGO! 0BA7 application with a smart phone or a tablet PC via WLAN or Internet. It allows to switch digital signal and adjust analogue values or timer settings. Supported will be the WLAN connection to a LOGO! 0BA7 basic module via IP address typically or DynDNS- names which are used in the Internet.
With your LOGO! App you can ...
... define customised names.
For fixed connections and preconfigured values you can define customised names. This helps if you want to connect to several LOGO! devices and monitor different values.
Device list with names
... display diagnostic information in tabular form.
The diagnostic information of the LOGO! modules are shown as a table. Any entry in the diagnostic buffer can be deleted via the LOGO! App only if the problem was solved.
Diagnostic information
... read and change date and time settings.
Furthermore you can read, manually change or synchronise date and time settings with the actual date/time of your mobile device.
Date and time settings