American Standard 2649BW Post Installation CLEAN-UP, Aftercare and Cleaning, United States

Page 7

POST INSTALLATION CLEAN-UP

Remove all construction debris. Tile grout can be removed with a wooden popsicle stick or tongue depressor. Do not use wire brushes or any other metal implement on surface.

Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.

Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.

AFTERCARE and CLEANING

!WARNING: Cleaning products with labels that say “not suitable for use with ABS, acrylic or polystyrene” SHOULD NOT BE USED. Read all labels carefully.

Excessively hot water may cause surface damage.

HARSH CHEMICALS SHOULD NEVER BE USED ON SHOWER WALL SURFACE. Clean after use with a mild liquid household detergent cleaner. Do not use Lestoil, Lysol Disinfectant (spray or concentrate), or Lysol Basin, Tub and Tile Cleaner, Windex, Mr. Clean, Dow Disinfectant Bathroom Cleaner, or cleaning products in aerosol cans.

Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface blemishes.

Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface loses its sheen, dulled areas or light scratches can be restored by rubbing with a white "automotive type" polishing compound and waxing with a "liquid wax."

Do not wax areas where you walk or stand.

Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.

Clean the surrounding surface immediately after using caustic drain cleaners.

Burning cigarettes will damage the surface.

Should damage to the fixture occur, repairs can be made quickly and easily.

Your distributor or builder can provide details.

AS America, Inc. Limited Lifetime Warranty for Saver™ Walls

AS America, Inc. (”American Standard”) warrants to the original consumer purchaser that it will, at its option, repair or replace this these walls or any of its parts that are found by American Standard, in its sole judgment, to be defective under normal residential use and maintenance so long as it is owned by the original consumer purchaser.

To activate this limited warranty, the purchaser must go online to our website at www.americanstandard-us.com/warranty to register their bath walls within thirty (30) days of purchase.

In no event will American Standard be liable for the cost of repair or replacement of any installation materials including but not limited to tiles, marble etc.

This limited warranty DOES NOT COVER the following:

1.Defects or damages arising from shipping, installation, alterations, accidents, abuse, misuse, lack of proper maintenance and cleaning as directed in the owner’s manual and use of other than genuine American Standard replacement parts, in all cases whether caused by a plumbing contractor, service company, the owner or any other person.

2.Deterioration through normal wear and tear and the expense of normal maintenance.

3.Commercial application.

4.Options and accessories. American Standard’s limited warranty on these items is one year for parts only and excludes labor. This one year limited warranty covers accessories manufactured by American Standard (e.g. aprons, drains, grab bars, heaters, trim kits) against defects of material or workmanship. Warranty coverage begins on the date the accessory was originally purchased by the owner.

5.Postage or shipping costs for returning products for repairs or replacement under this limited warranty and labor or other costs incurred in connection with product removal or installation under this limited warranty.

6.ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, ALL OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED, OR THE EXTENSION BEYOND THE DURATION OF THIS LIMITED WARRANTY OF ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR AN INTENDED PURPOSE. (Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you.)

7.Responsibility for compliance with local code requirements. (Since local code requirements vary greatly distributors, retailers, dealers, installation contractors and users of plumbing products should determine whether there are any code restrictions on the installation or use of a specific product.)

This warranty gives you specific legal rights. You may have other legal rights that vary from state to state. For service under this warranty, you should contact the following:

In the United States:

In Canada:

In Mexico:

American Standard Brands

AS Canada ULC

American Standard B&K Mexico

P.O. Box 6820

5900 Avebury Rd.

S. de R.L. de C.V.

Piscataway, New Jersey 08855

Mississauga, Ontario

Via Morelos #330

Attention: Director of Consumer Affairs

Canada L5R 3M3

Col. Santa Clara

 

 

Ecatepec 55540 Edo. Mexico

For residents of the United States, warranty

Toll Free: (800) 387-0369

Toll Free: 01-800-839-1200

information may also be obtained by calling

www.americanstandard.ca

www.americanstandard.com.mx

the following toll free number: (800) 442-1902

 

 

www.americanstandard.com

 

 

7

754748 - 100 Rev. C

Image 7
Contents Installation Instructions Installation for use with tub Model# Hole saw Installation ProceduresCut Pencil line Tub Surround Adhesive bead Sealant Previously marked Panels being sure to stay below the lineGreen Board United States Post Installation CLEAN-UPAftercare and Cleaning Excessively hot water may cause surface damage

Saver Bath Walls, 2649BW specifications

The American Standard 2649BW Saver Bath Walls bring a new level of sophistication and functionality to bathroom design. Made to complement various styles and layouts, these bath walls provide a perfect balance of aesthetics and practicality, making them an excellent choice for both renovations and new constructions.

One of the main features of the Saver Bath Walls is their durable construction. Crafted from high-quality acrylic, these walls resist chips, cracks, and fading, ensuring a long-lasting finish that looks great even in high-use environments. The non-porous surface is easy to clean and maintain, making it an ideal solution for busy households where hygiene is a priority.

The Saver Bath Walls are designed with a sleek, modern look in mind. Their contemporary styling incorporates a clean, smooth surface that can easily blend with various design themes, from classic to modern. Additionally, the panels are pre-formed with built-in shelves, providing practical storage solutions for shampoos, soaps, and other bath essentials.

Innovative technologies are embedded in the design of the Saver Bath Walls, with water-resistant properties that help prevent mold and mildew growth. This is a significant advantage as it contributes to a healthier bathroom environment. The walls are also engineered with a unique built-in insulation system that enhances thermal performance, keeping the water warmer for longer and providing a more comfortable bathing experience.

Installation is straightforward with the Saver Bath Walls. The panels are lightweight, making handling easier for contractors and DIY enthusiasts alike. The system is designed for quick installation, which can help reduce labor costs and project timelines significantly.

These bath walls come in a variety of sizes and configurations, allowing for customization to fit any standard tub or shower space. Moreover, they are compatible with many American Standard products, ensuring a cohesive look throughout the bathroom.

In summary, the American Standard 2649BW Saver Bath Walls combine durability, ease of maintenance, contemporary design, and innovative technology, making them a top choice for anyone looking to upgrade their bathroom. Whether in a residential or commercial setting, these bath walls provide both form and function, enhancing the overall bathing experience.