Sonicare HX4871, HX4511, HX4571, HX4472 manual Removing the batteries

Page 11

ENGLISH 11

Please note that this process is not reversible.

To help protect our environment, we encourage you to recycle at approved recycling locations. Do not dispose of the batteries in normal household waste.

Removing the batteries

To remove the batteries yourself, you will need a flat-head (standard) screwdriver and a small towel. Basic safety precautions should be observed when following the procedure outlined below. Be sure to protect your eyes, hands, fingers and the surface on which you are working.

1With the brush head still attached to the power handle, completely deplete the batteries of electrical charge by pressing the power button and running a brushing cycle until it stops.

Repeatedly run brushing cycles until the handle will no longer activate the brush head.

2Remove the brush head from the handle.

C 3 Split the handle open by inserting the screwdriver head all the way through both slots on the top part of the handle throat, where the brush head was previously attached.

 

C

 

Turn the screwdriver handle sideways, using twisting and prying

 

 

4

 

 

 

motions, to crack open the handle along its side seams.

 

 

 

 

 

C

 

Pull the 2 handle sections completely apart.

 

 

5

 

 

 

 

 

Image 11
Contents Page Page HX4872, HX4871, HX4571, HX4511, HX4472 General description Charging Medical warningsAttaching the brush head Useful tips Using the applianceDental restorations dental work Tips for special needsStain removal BracesFeatures Easy-start\brushing power ramp-up Smartimer\ 2-minute timer Brush head CleaningRemoving the batteries Multiple places Troubleshooting Guarantee restrictionsPage Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page 4235 020