Invacare JLS5 specifications Replacing the Battery, Calibrate the Jasmine Scale

Page 6

Replacing the Battery

NOTE: For this procedure, refer to FIGURE 4.

NOTE: The scale is powered by a 9‐volt alkaline battery that should provide approximately 1500 readings before needing replacement.

When battery replacement is needed, LO BAT will appear on the display. Perform the following:

1.Slide the battery door open in the direction of the arrow.

2.Remove existing battery.

3.Install the NEW battery.

4.Reinstall the battery door.

Assembled

Scale

9V Battery

Battery

Door

Arrow

FIGURE 4 Replacing the Battery

Calibrate the Jasmine Scale

NOTE: For this procedure, refer to FIGURE 5 on page 7.

NOTE: The Jasmine Scale will be pre‐calibrated at the factory with the load cell. Should it be necessary to re‐calibrate the scale, follow the instructions outlined below.

1.The patient and the sling MUST be removed from the scale to properly calibrate the Jasmine Scale. Refer to Operation in the Jasmine Patient Lift Owner’s Manual, Invacare P/N 1150704, for further instructions.

2.For sling detachment instructions, refer to Lifting the Patient in the Jasmine Patient Lift Owner’s Manual, Invacare P/N 1150704.

3.Turn the scale display power on by pressing the ON/OFF key.

4.Rotate the Swivel Bar until the back of the scale display is visible.

5.Insert the tip of a paper clip or similar tool into the small hole on the back of the scale display and press the CAL button.

NOTE: Once the CAL button is pressed, “CAL1” will be seen in the display window.

6.Press the UNITS key. The display reads CAL2.

7.Press the LOCK/UNLOCK key. The display reads UNLD.

8.Press the ZERO key. The display reads LOAD.

9.Hang 200 pounds of calibrated weight from the scale and press the ZERO key.

10.Press the ZERO key. The display reads DONE.

Jasmine™ Scale JLS5

6

Part No 1152408

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Specifications Kit DescriptionJasmine Scale JLS5 Removing the Swivel Bar/Cradle Attachment Removing the Swivel Bar/Cradle AttachmentInstalling the Jasmine Scale Installing the Jasmine ScaleWeighing the Patient KEY Indicator Displayed Indicator Location DefinitionOperating the Scale Keypad FunctionsJasmine Scale JLS5 Replacing the Battery Calibrate the Jasmine ScaleTroubleshooting Symptom Probable Cause SolutionDisplay Codes Limited Warranty

JLS5 specifications

The Invacare JLS5 is a state-of-the-art wheelchair designed to provide superior mobility and comfort for users with diverse needs. As part of Invacare's commitment to enhancing the quality of life for individuals with disabilities, the JLS5 combines innovative technology and user-friendly features to create a seamless experience for both users and caregivers.

One of the standout features of the JLS5 is its advanced seat elevation technology. This allows users to elevate their seating position, enabling greater interaction with their environment and promoting independence. The ability to adjust height enhances social engagement and accessibility, allowing users to participate in a wider range of activities.

In addition to the seat elevation, the JLS5 integrates tilt and recline functions, offering customizable positioning that caters to individual comfort and medical needs. Whether for resting, interacting with others, or changing posture to alleviate pressure points, these adjustments can be made swiftly and intuitively. This feature is particularly vital for long-term wheelchair users, as it helps minimize the risk of pressure sores and improves overall circulation.

The JLS5 is designed with user-friendly controls, featuring an intuitive joystick that allows for precise maneuverability in various settings, including tight spaces. This makes the wheelchair suitable for both indoor and outdoor use. The robust construction of the chair ensures it can navigate different terrains, accommodating users who lead an active lifestyle.

Another notable aspect of the Invacare JLS5 is its customizable seating system. The chair supports various cushions and backrests, allowing for optimal comfort and support tailored to the user’s specific requirements. This flexibility is essential for ensuring long-term health and well-being, as it helps to distribute weight evenly and minimize discomfort during extended use.

Safety is paramount in the design of the JLS5, with features such as a reliable braking system and durable footrests that can accommodate varied user needs. Additionally, its lightweight yet sturdy frame ensures ease of transport, making it a practical choice for users who may need to travel frequently.

Overall, the Invacare JLS5 encapsulates modern engineering and ergonomic design, making it a top choice for individuals seeking independence and comfort in their daily lives. With its combination of innovative technologies and customizable features, the JLS5 truly stands out in the realm of mobility solutions.
Top Page Image Contents