Omron Healthcare HBF-514 instruction manual Error Indicators, Error Cause Correction Display

ERROR INDICATORS

ERROR	CAUSE	CORRECTION
DISPLAY
		Make sure you are barefoot.
		Make sure your palms or the soles of your feet
	Your palms or feet are not	are clean and dry.
		Make sure your palms or feet are correctly
	positioned over the electrodes
		positioned.
	correctly.
		Refer to CORRECT POSTURE FOR
		MEASUREMENT on page 25 and How to
		Hold the Grip Electrodes on page 26.
	The measurement position was not	Remain still and do not move until the
		measurement is complete.
	stable.
		Refer to CORRECT POSTURE FOR
	Your palms or feet were not placed
	correctly.	MEASUREMENT on page 25 and How to
		Hold the Grip Electrodes on page 26.
		Slightly moisten your palms or the soles of
	Your palms or feet are too dry.	your feet with a damp towel and retake the
		measurement.
		• Check the settings entered for your personal
		data. Change the settings if needed. Retake
	The Body Composition values are	the measurement.
		• The main unit cannot measure body
	outside the measurement range.	composition outside its measurement range,
		even if the age, gender and height settings are
		correct. Refer to Display and Set Ranges on
		page 42.
		Remove the batteries. Wait one minute.
		Reinstall the batteries. Refer to BATTERY
	The monitor is not set up correctly.	INSTALLATION on page 17.
		Press the Power Switch and turn the monitor
		on. Retake the measurement.
	You stepped onto the measurement	Wait until 0.0 lb is displayed before stepping
	platform before 0.0 lb was	onto the measurement platform.
	displayed.
	The monitor was moved before	Do not move the monitor until 0.0 lb is
	0.0 lb was displayed.	displayed.
	Movement during measurement.	Do not move until measurement is complete.
	Monitor detected weight over	This monitor can only be used by people
	330.0 lb.	weighing less than 330.0 lb.

37