LG Electronics 47WX50MF owner manual Network Status, Tips for Network setting, Ting the network

Page 23

ENTERTAINMENT 23

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network set- tings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applica- ble terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a “Router” may not be allowed or its usage may be limited depending on the poli- cies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the Navigation buttons to scroll to NET- WORK and press OK.

3Press the Navigation buttons to select Net- work Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after set-

ting the network.

 

Close

Return to the previous menu.

ENGLISH

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Monitor Signage Table of Contents IR Codes Licenses Assembling and Preparing AccessoriesRemote control and Batteries Power Cord Sub 15 pin signal cableMP500 Screw Card Optional AccessoriesStandScrew Connection panel Parts and ButtonsPortrait Layout Connecting the StandConnecting MP500 Correct Method Incorrect Method Storage Method for Panel ProtectionMoving the Device in a Vertical Position Moving HandlesRemote Control Navigation buttons Scrolls through menus or Using the Monitor SETRGB Connection Using the Monitor SETConnecting to a PC Hdmi Connection DVI ConnectionDP Connection Customizing Image Options Adjusting the ScreenSelecting an Image Mode Customizing PC Display Options Adjusting the SoundSelecting an Sound Mode Customizing Sound Options Using Additional OptionsAdjusting Aspect Ratio Just Scan Selecting an input source Using the Input ListDepending on model Connecting to a Wired NetworkSelect IP Auto Setting or IP Manual Setting EntertainmentClose Return to the previous menu Tips for Network settingNetwork Status Ting the networkTips for using USB storage devices Connecting USB Storage DevicesPhoto List Browsing FilesRP,TP,ASF,WMV,FLV Supported file formatViewing Movies Video options Tips for using playing video filesLanguage RepeatMenu Description Picture Size AudioPhoto List Viewing PhotosGY Saving Using photo optionsPhoto options EnerTransition Effect Option Sound Mode, Clear Voice II or Balance Listening to MusicMusic List Control playback by using the following buttonsViewing the Contents List DivX VOD Deregistration DivX VOD GuideDivX VOD Registration PIP/PBP Using PIP/PBPMovie List Photo ListAccessing the Main Menus Customizing SettingsPicture Picture SettingsScreen Picture Mode optionsAdvanced Control Audio Audio SettingsTime Time SettingsOption Option SettingsRotate OSD clockwise 270 Setting Description Tile Mode To use this functionSetting Description Fan Tile Mode Natural mode Tile ModePIP PositionTop left Bottom left Size Top right Bottom right USBPicture ID Off Picture IDNetwork Network SettingsGaming device Making ConnectionsHD Receiver Speaker PCCamcorder/CameraNot included YyUse a High Speed Hdmi Cable Component Connection Avcvbs Connection LAN Connection Connecting to the LANConnecting to a USB DVI Cable Daisy Chain MonitorsRGB Cable No image is displayed TroubleshootingProblem Resolution After-image appears on the product Key Lock On message appearsScreen image looks abnormal Operation does not work normally Audio function does not workScreen color is abnormal Specifications Speaker Specifications DTV RGB PC supported mode DTV ModeHDMI/DVI/Display PortPC supported mode HDMI/DVICommunication Parameter Connecting the CableRS-232C Configurations Controlling the Multiple ProductHexadecimal Command reference listCommand Data Serial No. Check Acknowledgement Transmission / Receiving protocolTransmission Picture Mode Command d x To select the picture mode Power Command k aEnergy Saving Command j q Aspect Ratio Command k c To adjust the screen formatColor Command k i Video input only Position Command f q Brightness Command k h Tint Command k j Video input onlySharpness Command k k Video input only Sound Mode Command d y To select the sound mode Size Command f s To set the Horizontal sizeAuto Configuration Command j u Balance Command k t To adjust balanceVolume Mute Command k e To select screen mute on/off Bass Command k s Volume Control Command k fSpeaker Command d Time 1Year/ Month/ Day Command f a Power On Delay Command f h Sleep Time Command f f To set sleep timeISM mode Command j p Language Command f i To set language for OSDTile ID Command d i To set Tile ID Reset Command f kTile Mode Command d d Tile Mode Check Command d z To check Tile Mode statusKey Command m c Tile H Size Command d g DPM Select Command f jRemote Controller Lock/ Key Lock Command k m Serial No.Check Command f y To read the serial numbers OSD Select Command k lElapsed time return Command d l To read the panel used time Code Hexa Function IR CodesModel
Top Page Image Contents